Hi Rob
On 05/01/2018 04:56 PM, Rob Herring wrote:
On Thu, Apr 26, 2018 at 06:18:30PM +0200, Ludovic Barre wrote:
From: Ludovic Barre <ludovic.barre@xxxxxx>
Exti controller has been differently integrated on stm32mp1 SoC.
A parent irq has only one external interrupt. A hierachy domain could
be used. Handlers are call by parent, each parent interrupt could be
masked and unmasked according to the needs.
Signed-off-by: Ludovic Barre <ludovic.barre@xxxxxx>
---
.../interrupt-controller/st,stm32-exti.txt | 3 +
drivers/irqchip/irq-stm32-exti.c | 322 +++++++++++++++++++++
2 files changed, 325 insertions(+)
diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt
index edf03f0..136bd61 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt
@@ -5,11 +5,14 @@ Required properties:
- compatible: Should be:
"st,stm32-exti"
"st,stm32h7-exti"
+ "st,stm32mp1-exti"
- reg: Specifies base physical address and size of the registers
- interrupt-controller: Indentifies the node as an interrupt controller
- #interrupt-cells: Specifies the number of cells to encode an interrupt
specifier, shall be 2
- interrupts: interrupts references to primary interrupt controller
+ (only needed for exti controller with multiple exti under
+ same parent interrupt: st,stm32-exti and st,stm32h7-exti")
Example:
diff --git a/drivers/irqchip/irq-stm32-exti.c b/drivers/irqchip/irq-stm32-exti.c
index b38c655..ebf7146 100644
--- a/drivers/irqchip/irq-stm32-exti.c
+++ b/drivers/irqchip/irq-stm32-exti.c
[...]
+static const struct stm32_desc_irq stm32mp1_desc_irq[] = {
+ { .exti = 1, .irq_parent = 7 },
+ { .exti = 2, .irq_parent = 8 },
+ { .exti = 3, .irq_parent = 9 },
+ { .exti = 4, .irq_parent = 10 },
+ { .exti = 5, .irq_parent = 23 },
+ { .exti = 6, .irq_parent = 64 },
+ { .exti = 7, .irq_parent = 65 },
+ { .exti = 8, .irq_parent = 66 },
+ { .exti = 9, .irq_parent = 67 },
+ { .exti = 10, .irq_parent = 40 },
+ { .exti = 11, .irq_parent = 42 },
+ { .exti = 12, .irq_parent = 76 },
+ { .exti = 13, .irq_parent = 77 },
+ { .exti = 14, .irq_parent = 121 },
+ { .exti = 15, .irq_parent = 127 },
+ { .exti = 16, .irq_parent = 1 },
+ { .exti = 65, .irq_parent = 144 },
+ { .exti = 68, .irq_parent = 143 },
+ { .exti = 73, .irq_parent = 129 },
+};
You can use an interrupt-map property rather than put this into the
driver.
interrupt-map seemed interesting and promising like used in pci host.
At first sight this property can't be used into node with
"interrupt-controller" property (see in drivers/of/irq.c function:
of_irq_parse_raw) because "of_irq_parse_raw" checks if node got
it first, and after lookup the interrupt-map.
Rob, Thomas, Jason, Marc what do you prefers or the right ways...?
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
