On Thu, Apr 19, 2018 at 01:19:39PM +0200, Stefan Wahren wrote: > The iMX6ULL UART5_RTS_B_DATA_SELECT_INPUT DAISY Register has some different > bit definitions to that same register in the i.MX6UL. > > The bits for the i.MX6UL: > > 000 CSI_DATA03_ALT8 — Selecting Pad: CSI_DATA03 for Mode: ALT8 > 001 GPIO1_IO08_ALT8 — Selecting Pad: GPIO1_IO08 for Mode: ALT8 > 010 GPIO1_IO09_ALT8 — Selecting Pad: GPIO1_IO09 for Mode: ALT8 > 011 ENET1_RX_EN_ALT1 — Selecting Pad: ENET1_RX_EN for Mode: ALT1 > 100 ENET1_TX_DATA0_ALT1 — Selecting Pad: ENET1_TX_DATA0 for Mode: ALT1 > 101 CSI_DATA02_ALT8 — Selecting Pad: CSI_DATA02 for Mode: ALT8 > > But for the i.MX6ULL: > > 000 CSI_DATA03_ALT8 — Selecting Pad: CSI_DATA03 for Mode: ALT8 > 001 GPIO1_IO08_ALT8 — Selecting Pad: GPIO1_IO08 for Mode: ALT8 > 010 GPIO1_IO09_ALT8 — Selecting Pad: GPIO1_IO09 for Mode: ALT8 > 011 UART1_CTS_B_ALT9 — Selecting Pad: UART1_CTS_B for Mode: ALT9 > 100 UART1_RTS_B_ALT9 — Selecting Pad: UART1_RTS_B for Mode: ALT9 > 101 ENET1_RX_EN_ALT1 — Selecting Pad: ENET1_RX_EN for Mode: ALT1 > 110 ENET1_TX_DATA0_ALT1 — Selecting Pad: ENET1_TX_DATA0 for Mode: ALT1 > 111 CSI_DATA02_ALT8 — Selecting Pad: CSI_DATA02 for Mode: ALT8 > > Signed-off-by: Stefan Wahren <stefan.wahren@xxxxxxxx> > --- > arch/arm/boot/dts/imx6ull-pinfunc.h | 5 +++++ > 1 file changed, 5 insertions(+) Acked-by: Rob Herring <robh@xxxxxxxxxx> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
