Like axp221, axp223, axp813 the axp803 is also supporting external regulator to drive the OTG VBus through N_VBUSEN PMIC pin. Add support for it. Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx> Reviewed-by: Rob Herring <robh@xxxxxxxxxx> Reviewed-by: Chen-Yu Tsai <wens@xxxxxxxx> --- Changes for v6: - Rebase on master Changes for v5: - Collect Chen-Yu reviewed-by tag Changes for v4: - rebase on master Changes for v3: - Update drivevbus in table of regulators Documentation/devicetree/bindings/mfd/axp20x.txt | 3 ++- drivers/regulator/axp20x-regulator.c | 2 ++ 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt index 9455503b0299..d1762f3b30af 100644 --- a/Documentation/devicetree/bindings/mfd/axp20x.txt +++ b/Documentation/devicetree/bindings/mfd/axp20x.txt @@ -43,7 +43,7 @@ Optional properties: regulator to drive the OTG VBus, rather then as an input pin which signals whether the board is driving OTG VBus or not. - (axp221 / axp223 / axp813 only) + (axp221 / axp223 / axp803/ axp813 only) - x-powers,master-mode: Boolean (axp806 only). Set this when the PMIC is wired for master mode. The default is slave mode. @@ -132,6 +132,7 @@ FLDO2 : LDO : fldoin-supply : shared supply LDO_IO0 : LDO : ips-supply : GPIO 0 LDO_IO1 : LDO : ips-supply : GPIO 1 RTC_LDO : LDO : ips-supply : always on +DRIVEVBUS : Enable output : drivevbus-supply : external regulator AXP806 regulators, type, and corresponding input supply names: diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c index 181622b2813d..91b8ff8bac15 100644 --- a/drivers/regulator/axp20x-regulator.c +++ b/drivers/regulator/axp20x-regulator.c @@ -721,6 +721,8 @@ static int axp20x_regulator_probe(struct platform_device *pdev) case AXP803_ID: regulators = axp803_regulators; nregulators = AXP803_REG_ID_MAX; + drivevbus = of_property_read_bool(pdev->dev.parent->of_node, + "x-powers,drive-vbus-en"); break; case AXP806_ID: regulators = axp806_regulators; -- 2.14.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
