On Thu, Apr 19, 2018 at 11:26:07PM +0530, Sandeep Panda wrote:
> Add support for Innolux TV123WAM 12.3" panel which
> is an eDP panel.
It seems like you could just use the panel-simple driver, no? Given that this
driver doesn't have any power timing, that will probably work better since the
warranty won't be voided :)
Sean
>
> Signed-off-by: Sandeep Panda <spanda@xxxxxxxxxxxxxx>
> ---
> drivers/gpu/drm/panel/panel-innolux-tv123wam.c | 293 +++++++++++++++++++++++++
> 1 file changed, 293 insertions(+)
> create mode 100644 drivers/gpu/drm/panel/panel-innolux-tv123wam.c
>
> diff --git a/drivers/gpu/drm/panel/panel-innolux-tv123wam.c b/drivers/gpu/drm/panel/panel-innolux-tv123wam.c
> new file mode 100644
> index 0000000..5632b02
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-innolux-tv123wam.c
> @@ -0,0 +1,293 @@
> +/*
> + * Copyright (c) 2018, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <drm/drmP.h>
> +#include <drm/drm_panel.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/platform_device.h>
> +#include <linux/regulator/consumer.h>
> +
> +struct innolux_edp_2k_panel_desc {
> + const struct drm_display_mode *modes;
> + unsigned int num_modes;
> + u32 bpc;
> + u32 bus_flags;
> +};
> +
> +struct innolux_edp_2k_panel {
> + struct drm_panel base;
> + bool enabled;
> + bool prepared;
> + const struct innolux_edp_2k_panel_desc *desc;
> + struct regulator *supply;
> + struct gpio_desc *enable_gpio;
> + struct backlight_device *backlight;
> +};
> +
> +static const struct drm_display_mode innolux_edp_2k_mode = {
> + .clock = 206016,
> + .hdisplay = 2160,
> + .hsync_start = 2160 + 48,
> + .hsync_end = 2160 + 48 + 32,
> + .htotal = 2160 + 48 + 32 + 80,
> + .vdisplay = 1440,
> + .vsync_start = 1440 + 3,
> + .vsync_end = 1440 + 3 + 10,
> + .vtotal = 1440 + 3 + 10 + 27,
> + .vrefresh = 60,
> + .flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC,
> +};
> +
> +static const struct innolux_edp_2k_panel_desc innolux_edp_2k = {
> + .modes = &innolux_edp_2k_mode,
> + .num_modes = 1,
> + .bpc = 8,
> + .bus_flags = DRM_BUS_FLAG_PIXDATA_POSEDGE,
> +};
> +
> +static const struct of_device_id platform_of_match[] = {
> + {
> + .compatible = "innolux, edp_2k_panel",
> + .data = &innolux_edp_2k,
> + },
> +};
> +
> +static inline struct innolux_edp_2k_panel *
> +to_innolux_edp_2k_panel(struct drm_panel *panel)
> +{
> + return container_of(panel, struct innolux_edp_2k_panel, base);
> +}
> +
> +static int innolux_edp_2k_panel_disable(struct drm_panel *panel)
> +{
> + struct innolux_edp_2k_panel *pdata = to_innolux_edp_2k_panel(panel);
> +
> + if (!pdata->enabled)
> + return 0;
> +
> + if (pdata->backlight) {
> + pdata->backlight->props.power = FB_BLANK_POWERDOWN;
> + pdata->backlight->props.state |= BL_CORE_FBBLANK;
> + backlight_update_status(pdata->backlight);
> + }
> +
> + pdata->enabled = false;
> +
> + return 0;
> +}
> +
> +static int innolux_edp_2k_panel_unprepare(struct drm_panel *panel)
> +{
> + struct innolux_edp_2k_panel *pdata = to_innolux_edp_2k_panel(panel);
> +
> + if (!pdata->prepared)
> + return 0;
> +
> + if (pdata->enable_gpio)
> + gpiod_set_value_cansleep(pdata->enable_gpio, 0);
> +
> + regulator_disable(pdata->supply);
> +
> + pdata->prepared = false;
> +
> + return 0;
> +}
> +
> +static int innolux_edp_2k_panel_prepare(struct drm_panel *panel)
> +{
> + struct innolux_edp_2k_panel *pdata = to_innolux_edp_2k_panel(panel);
> + int ret;
> +
> + if (pdata->prepared)
> + return 0;
> +
> + ret = regulator_enable(pdata->supply);
> + if (ret < 0) {
> + dev_err(panel->dev, "failed to enable supply: %d\n", ret);
> + return ret;
> + }
> +
> + if (pdata->enable_gpio)
> + gpiod_set_value_cansleep(pdata->enable_gpio, 1);
> +
> + pdata->prepared = true;
> +
> + return 0;
> +}
> +
> +static int innolux_edp_2k_panel_enable(struct drm_panel *panel)
> +{
> + struct innolux_edp_2k_panel *pdata = to_innolux_edp_2k_panel(panel);
> +
> + if (pdata->enabled)
> + return 0;
> +
> + if (pdata->backlight) {
> + pdata->backlight->props.state &= ~BL_CORE_FBBLANK;
> + pdata->backlight->props.power = FB_BLANK_UNBLANK;
> + backlight_update_status(pdata->backlight);
> + }
> +
> + pdata->enabled = true;
> +
> + return 0;
> +}
> +
> +static int innolux_edp_2k_panel_get_modes(struct drm_panel *panel)
> +{
> + struct innolux_edp_2k_panel *pdata = to_innolux_edp_2k_panel(panel);
> + struct drm_connector *connector = pdata->base.connector;
> + struct drm_device *drm = pdata->base.drm;
> + struct drm_display_mode *mode;
> + unsigned int i, num = 0;
> +
> + if (!pdata->desc || !connector || !drm)
> + return 0;
> +
> + for (i = 0; i < pdata->desc->num_modes; i++) {
> + const struct drm_display_mode *m = &pdata->desc->modes[i];
> +
> + mode = drm_mode_duplicate(drm, m);
> + if (!mode) {
> + dev_err(drm->dev, "failed to add mode %ux%u@%u\n",
> + m->hdisplay, m->vdisplay, m->vrefresh);
> + continue;
> + }
> +
> + mode->type |= DRM_MODE_TYPE_DRIVER;
> +
> + if (pdata->desc->num_modes == 1)
> + mode->type |= DRM_MODE_TYPE_PREFERRED;
> +
> + drm_mode_set_name(mode);
> +
> + drm_mode_probed_add(connector, mode);
> + num++;
> + }
> +
> + connector->display_info.bpc = pdata->desc->bpc;
> + connector->display_info.bus_flags = pdata->desc->bus_flags;
> +
> + return num;
> +}
> +
> +static const struct drm_panel_funcs innolux_edp_2k_panel_funcs = {
> + .disable = innolux_edp_2k_panel_disable,
> + .unprepare = innolux_edp_2k_panel_unprepare,
> + .prepare = innolux_edp_2k_panel_prepare,
> + .enable = innolux_edp_2k_panel_enable,
> + .get_modes = innolux_edp_2k_panel_get_modes,
> +};
> +
> +static int innolux_edp_2k_panel_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + const struct of_device_id *id;
> + struct device_node *backlight;
> + struct innolux_edp_2k_panel *pdata;
> + int ret;
> +
> + id = of_match_node(platform_of_match, pdev->dev.of_node);
> + if (!id)
> + return -ENODEV;
> +
> + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
> + if (!pdata)
> + return -ENOMEM;
> +
> + pdata->enabled = false;
> + pdata->prepared = false;
> + pdata->desc = id->data;
> +
> + pdata->supply = devm_regulator_get(dev, "power");
> + if (IS_ERR(pdata->supply))
> + return PTR_ERR(pdata->supply);
> +
> + pdata->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
> + if (IS_ERR(pdata->enable_gpio))
> + return PTR_ERR(pdata->enable_gpio);
> +
> + backlight = of_parse_phandle(dev->of_node, "backlight", 0);
> + if (backlight) {
> + pdata->backlight = of_find_backlight_by_node(backlight);
> + of_node_put(backlight);
> +
> + if (!pdata->backlight)
> + return -EPROBE_DEFER;
> + }
> +
> + drm_panel_init(&pdata->base);
> + pdata->base.dev = dev;
> + pdata->base.funcs = &innolux_edp_2k_panel_funcs;
> +
> + ret = drm_panel_add(&pdata->base);
> + if (ret < 0)
> + goto free_backlight;
> +
> + dev_set_drvdata(dev, pdata);
> +
> + return 0;
> +
> +free_backlight:
> + if (pdata->backlight)
> + put_device(&pdata->backlight->dev);
> +
> + return ret;
> +}
> +
> +static int innolux_edp_2k_panel_remove(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct innolux_edp_2k_panel *pdata = dev_get_drvdata(dev);
> +
> + drm_panel_detach(&pdata->base);
> + drm_panel_remove(&pdata->base);
> +
> + innolux_edp_2k_panel_disable(&pdata->base);
> + innolux_edp_2k_panel_unprepare(&pdata->base);
> +
> + if (pdata->backlight)
> + put_device(&pdata->backlight->dev);
> +
> + return 0;
> +}
> +
> +static struct platform_driver innolux_edp_2k_panel_driver = {
> + .driver = {
> + .name = "innolux-2k-edp-panel",
> + .of_match_table = platform_of_match,
> + },
> + .probe = innolux_edp_2k_panel_probe,
> + .remove = innolux_edp_2k_panel_remove,
> +};
> +
> +static int __init innolux_edp_2k_panel_init(void)
> +{
> + int ret;
> +
> + ret = platform_driver_register(&innolux_edp_2k_panel_driver);
> + if (ret < 0)
> + return ret;
> +
> + return 0;
> +}
> +module_init(innolux_edp_2k_panel_init);
> +
> +static void __exit innolux_edp_2k_panel_exit(void)
> +{
> + platform_driver_unregister(&innolux_edp_2k_panel_driver);
> +}
> +module_exit(innolux_edp_2k_panel_exit);
> +
> +MODULE_DESCRIPTION("Innolux 2k eDP panel driver");
> +MODULE_LICENSE("GPL");
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>
--
Sean Paul, Software Engineer, Google / Chromium OS
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
