RTC embedded in stm32mp1 SoC is slightly different from stm32h7 one, it
doesn't require to disable backup domain write protection, and rtc_ck
parent clock assignment isn't allowed.
To sum up, stm32mp1 RTC requires 2 clocks, pclk and rtc_ck, and an RTC
alarm interrupt.
Signed-off-by: Amelie Delaunay <amelie.delaunay@xxxxxx>
---
.../devicetree/bindings/rtc/st,stm32-rtc.txt | 27 +++++++++++++++++-----
1 file changed, 21 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt
index 00f8b5d..f1c2080 100644
--- a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt
+++ b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt
@@ -1,25 +1,31 @@
STM32 Real Time Clock
Required properties:
-- compatible: can be either "st,stm32-rtc" or "st,stm32h7-rtc", depending on
- the device is compatible with stm32(f4/f7) or stm32h7.
+- compatible: can be "st,stm32-rtc", "st,stm32h7-rtc" or "st,stm32mp1-rtc",
+ depending on the device is compatible with stm32(f4/f7), stm32h7
+ or stm32mp1.
- reg: address range of rtc register set.
- clocks: can use up to two clocks, depending on part used:
- "rtc_ck": RTC clock source.
- It is required on stm32(f4/f7) and stm32h7.
+ It is required on stm32(f4/f7/h7/mp1).
- "pclk": RTC APB interface clock.
It is not present on stm32(f4/f7).
- It is required on stm32h7.
+ It is required on stm32(h7/mp1).
- clock-names: must be "rtc_ck" and "pclk".
- It is required only on stm32h7.
+ It is required on stm32(h7/mp1).
- interrupt-parent: phandle for the interrupt controller.
+ It is required on stm32(f4/f7/h7).
- interrupts: rtc alarm interrupt.
+- interrupts-extended: replace interrupts property on stm32mp1, to specify rtc
+ alarm wakeup interrupt, which is on exti interrupt controller instead of gic.
+ It is required on stm32mp1.
- st,syscfg: phandle/offset/mask triplet. The phandle to pwrcfg used to
access control register at offset, and change the dbp (Disable Backup
Protection) bit represented by the mask, mandatory to disable/enable backup
domain (RTC registers) write protection.
+ It is required on stm32(f4/f7/h7).
-Optional properties (to override default rtc_ck parent clock):
+Optional properties (to override default rtc_ck parent clock on stm32(f4/f7/h7):
- assigned-clocks: reference to the rtc_ck clock entry.
- assigned-clock-parents: phandle of the new parent clock of rtc_ck.
@@ -48,3 +54,12 @@ Example:
interrupt-names = "alarm";
st,syscfg = <&pwrcfg 0x00 0x100>;
};
+
+ rtc: rtc@5c004000 {
+ compatible = "st,stm32mp1-rtc";
+ reg = <0x5c004000 0x400>;
+ clocks = <&rcc RTCAPB>, <&rcc RTC>;
+ clock-names = "pclk", "rtc_ck";
+ interrupts-extended = <&intc GIC_SPI 3 IRQ_TYPE_NONE>,
+ <&exti 19 1>;
+ };
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
