Changelog: v3 -> v4: Current patchset separates out eDP panel specific resources from sn65dsi86 bridge driver and creates a separate driver for the innloux edp panel. Now bridge driver check if any panel is attached or not to get the supported modes. If any panel is attached then query from panel driver to get the modes, or else probe the provided i2c adapter to read the modes from EDID. Removed hardcoding of bridge init sequence. With this patchset bridge driver now will program the init sequence based on the current mode set by drm framework. Current patchset is not tested on actual bridge chip/panel. Sandeep Panda (4): drm/bridge: add support for sn65dsi86 bridge driver dt-bindings: drm/bridge: Document sn65dsi86 bridge bindings drm/panel: add Innolux TV123WAM eDP panel driver dt-bindings: Add Innolux TV123WAM panel bindings .../bindings/display/bridge/ti,sn65dsi86.txt | 60 ++ .../display/panel/innolux,edp-2k-panel.txt | 21 + drivers/gpu/drm/bridge/ti-sn65dsi86.c | 742 +++++++++++++++++++++ drivers/gpu/drm/panel/panel-innolux-tv123wam.c | 299 +++++++++ 4 files changed, 1122 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt create mode 100644 Documentation/devicetree/bindings/display/panel/innolux,edp-2k-panel.txt create mode 100644 drivers/gpu/drm/bridge/ti-sn65dsi86.c create mode 100644 drivers/gpu/drm/panel/panel-innolux-tv123wam.c -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
