Re: [v3,2/2] clk: qcom: clk-rpmh: Add QCOM RPMh clock driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Apr 14, 2018 at 08:06:41AM +0530, Taniya Das wrote:
> Add the RPMh clock driver to control the RPMh managed clock resources on
> some of the Qualcomm Technologies, Inc. SoCs.
> 
> Signed-off-by: David Collins <collinsd@xxxxxxxxxxxxxx>
> Signed-off-by: Amit Nischal <anischal@xxxxxxxxxxxxxx>
> ---
>  drivers/clk/qcom/Kconfig    |   9 ++
>  drivers/clk/qcom/Makefile   |   1 +
>  drivers/clk/qcom/clk-rpmh.c | 367 ++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 377 insertions(+)
>  create mode 100644 drivers/clk/qcom/clk-rpmh.c
>
> --
> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
> index fbf4532..63c3372 100644
> --- a/drivers/clk/qcom/Kconfig
> +++ b/drivers/clk/qcom/Kconfig
> @@ -112,6 +112,15 @@ config IPQ_GCC_8074
>  	  i2c, USB, SD/eMMC, etc. Select this for the root clock
>  	  of ipq8074.
> 
> +config QCOM_CLK_RPMH
> +	tristate "RPMh Clock Driver"
> +	depends on COMMON_CLK_QCOM && QCOM_RPMH
> +	help
> +	 RPMh manages shared resources on some Qualcomm Technologies, Inc.
> +	 SoCs. It accepts requests from other hardware subsystems via RSC.
> +	 Say Y if you want to support the clocks exposed by RPMh on
> +	 platforms such as sdm845.
> +
>  config MSM_GCC_8660
>  	tristate "MSM8660 Global Clock Controller"
>  	depends on COMMON_CLK_QCOM
> diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
> index 230332c..b2b5babf 100644
> --- a/drivers/clk/qcom/Makefile
> +++ b/drivers/clk/qcom/Makefile
> @@ -36,5 +36,6 @@ obj-$(CONFIG_MSM_MMCC_8996) += mmcc-msm8996.o
>  obj-$(CONFIG_QCOM_A53PLL) += a53-pll.o
>  obj-$(CONFIG_QCOM_CLK_APCS_MSM8916) += apcs-msm8916.o
>  obj-$(CONFIG_QCOM_CLK_RPM) += clk-rpm.o
> +obj-$(CONFIG_QCOM_CLK_RPMH) += clk-rpmh.o
>  obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o
>  obj-$(CONFIG_SPMI_PMIC_CLKDIV) += clk-spmi-pmic-div.o
> diff --git a/drivers/clk/qcom/clk-rpmh.c b/drivers/clk/qcom/clk-rpmh.c
> new file mode 100644
> index 0000000..fa61284
> --- /dev/null
> +++ b/drivers/clk/qcom/clk-rpmh.c
> @@ -0,0 +1,367 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2018, The Linux Foundation. All rights reserved.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/err.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <soc/qcom/cmd-db.h>
> +#include <soc/qcom/rpmh.h>
> +
> +#include <dt-bindings/clock/qcom,rpmh.h>
> +
> +#define CLK_RPMH_ARC_EN_OFFSET	0
> +#define CLK_RPMH_VRM_EN_OFFSET	4
> +#define CLK_RPMH_APPS_RSC_AO_STATE_MASK (BIT(RPMH_WAKE_ONLY_STATE) | \
> +					 BIT(RPMH_ACTIVE_ONLY_STATE))
> +#define CLK_RPMH_APPS_RSC_STATE_MASK (BIT(RPMH_WAKE_ONLY_STATE) | \
> +				      BIT(RPMH_ACTIVE_ONLY_STATE) | \
> +				      BIT(RPMH_SLEEP_STATE))
> +struct clk_rpmh {
> +	struct clk_hw hw;
> +	const char *res_name;
> +	u32 res_addr;
> +	u32 res_en_offset;
> +	u32 res_on_val;
> +	u32 res_off_val;
> +	u32 state;
> +	u32 aggr_state;
> +	u32 last_sent_aggr_state;
> +	u32 valid_state_mask;
> +	struct rpmh_client *rpmh_client;
> +	struct device *dev;
> +	struct clk_rpmh *peer;
> +	unsigned long rate;
> +};
> +
> +struct rpmh_cc {
> +	struct clk_onecell_data data;
> +	struct clk *clks[];
> +};
> +
> +struct clk_rpmh_desc {
> +	struct clk_hw **clks;
> +	size_t num_clks;
> +};

Could you briefly document the struct members, especially struct clk_rpmh?

> +static DEFINE_MUTEX(rpmh_clk_lock);
> +
> +#define __DEFINE_CLK_RPMH(_platform, _name, _name_active, _res_name,	\
> +			  _res_en_offset, _res_on, _res_off, _rate)	\
> +	static struct clk_rpmh _platform##_##_name_active;		      \
> +	static struct clk_rpmh _platform##_##_name = {			      \
> +		.res_name = _res_name,					      \
> +		.res_en_offset = _res_en_offset,			      \
> +		.res_on_val = _res_on,					      \
> +		.res_off_val = _res_off,				      \
> +		.rate = _rate,						      \
> +		.peer = &_platform##_##_name_active,			      \
> +		.valid_state_mask = CLK_RPMH_APPS_RSC_STATE_MASK,	      \
> +		.hw.init = &(struct clk_init_data){			      \
> +			.ops = &clk_rpmh_ops,			              \
> +			.name = #_name,					      \
> +		},							      \
> +	};								      \
> +	static struct clk_rpmh _platform##_##_name_active = {		      \
> +		.res_name = _res_name,					      \
> +		.res_en_offset = _res_en_offset,			      \
> +		.res_on_val = _res_on,					      \
> +		.res_off_val = _res_off,				      \
> +		.rate = _rate,						      \
> +		.peer = &_platform##_##_name,				      \
> +		.valid_state_mask = CLK_RPMH_APPS_RSC_AO_STATE_MASK,	      \
> +		.hw.init = &(struct clk_init_data){			      \
> +			.ops = &clk_rpmh_ops,				      \
> +			.name = #_name_active,				      \
> +		},							      \
> +	}
> +
> +#define DEFINE_CLK_RPMH_ARC(_platform, _name, _name_active, _res_name, \
> +			    _res_on, _res_off, _rate) \
> +	__DEFINE_CLK_RPMH(_platform, _name, _name_active, _res_name,	\
> +			  CLK_RPMH_ARC_EN_OFFSET, _res_on, _res_off, _rate)
> +
> +#define DEFINE_CLK_RPMH_VRM(_platform, _name, _name_active, _res_name,	\
> +			    _rate)					 \
> +	__DEFINE_CLK_RPMH(_platform, _name, _name_active, _res_name,     \
> +			  CLK_RPMH_VRM_EN_OFFSET, true, false, _rate)
> +
> +static inline struct clk_rpmh *to_clk_rpmh(struct clk_hw *_hw)
> +{
> +	return container_of(_hw, struct clk_rpmh, hw);
> +}
> +
> +static inline bool has_state_changed(struct clk_rpmh *c, u32 state)
> +{
> +	return ((c->last_sent_aggr_state & BIT(state))
> +		!= (c->aggr_state & BIT(state)));
> +}
> +
> +static int clk_rpmh_send_aggregate_command(struct clk_rpmh *c)
> +{
> +	struct tcs_cmd cmd = { 0 };
> +	u32 cmd_state, on_val;
> +	enum rpmh_state state = RPMH_SLEEP_STATE;
> +	int ret = 0;

nit: initialization of 'ret' is not needed.

> +
> +	cmd.addr = c->res_addr + c->res_en_offset;
> +	cmd_state = c->aggr_state;
> +	on_val = c->res_on_val;
> +
> +	for (; state <= RPMH_ACTIVE_ONLY_STATE; state++) {

It would be clearer to initialize 'state' here.

> +		if (has_state_changed(c, state)) {
> +			cmd.data = (cmd_state & BIT(state)) ? on_val : 0;
                                                                       ~
Shouldn't this be c->res_off_val?

> +			ret = rpmh_write_async(c->rpmh_client, state,
> +						&cmd, 1);
> +			if (ret) {
> +				dev_err(c->dev, "set %s state of %s failed: (%d)\n",
> +					(!state) ? "sleep" :
> +					(state == RPMH_WAKE_ONLY_STATE)	?
> +					"wake" : "active", c->res_name, ret);
> +				return ret;
> +			}
> +		}
> +	}
> +
> +	c->last_sent_aggr_state = c->aggr_state;
> +	c->peer->last_sent_aggr_state =  c->last_sent_aggr_state;
> +
> +	return 0;
> +}
> +
> +static int clk_rpmh_aggregate_state_send_command(struct clk_rpmh *c,
> +						bool enable)
> +{
> +	int ret;
> +
> +	/* Update state and aggregate state values based on enable value. */
> +	c->state = enable ? c->valid_state_mask : 0;
> +	c->aggr_state = c->state | c->peer->state;
> +	c->peer->aggr_state = c->aggr_state;
> +
> +	ret = clk_rpmh_send_aggregate_command(c);
> +	if (ret && enable) {
> +		c->state = 0;
> +	} else if (ret) {
> +		c->state = c->valid_state_mask;
> +		WARN(1, "clk: %s failed to disable\n", c->res_name);
> +	}
> +
> +	return ret;
> +}
> +
> +static int clk_rpmh_prepare(struct clk_hw *hw)
> +{
> +	struct clk_rpmh *c = to_clk_rpmh(hw);
> +	int ret = 0;
> +
> +	mutex_lock(&rpmh_clk_lock);
> +
> +	if (c->state)
> +		goto out;
> +
> +	ret = clk_rpmh_aggregate_state_send_command(c, true);

This ends up calling rpmh_write_async(), hence the operation might
still be in flight when the function returns. Is this intended?

> +out:
> +	mutex_unlock(&rpmh_clk_lock);
> +	return ret;
> +};
> +
> +static void clk_rpmh_unprepare(struct clk_hw *hw)
> +{
> +	struct clk_rpmh *c = to_clk_rpmh(hw);
> +
> +	mutex_lock(&rpmh_clk_lock);
> +
> +	if (!c->state)
> +		goto out;
> +
> +	clk_rpmh_aggregate_state_send_command(c, false);
> +out:
> +	mutex_unlock(&rpmh_clk_lock);
> +	return;
> +};
> +
> +static unsigned long clk_rpmh_recalc_rate(struct clk_hw *hw,
> +					  unsigned long parent_rate)
> +{
> +	struct clk_rpmh *r = to_clk_rpmh(hw);
> +
> +	/*
> +	 * RPMh clocks have a fixed rate. Return static rate set
> +	 * at init time.
> +	 */
> +	return r->rate;
> +}
> +
> +static const struct clk_ops clk_rpmh_ops = {
> +	.prepare	= clk_rpmh_prepare,
> +	.unprepare	= clk_rpmh_unprepare,
> +	.recalc_rate	= clk_rpmh_recalc_rate,
> +};
> +
> +/* Resource name must match resource id present in cmd-db. */
> +DEFINE_CLK_RPMH_ARC(sdm845, bi_tcxo, bi_tcxo_ao, "xo.lvl", 0x3, 0x0, 19200000);
> +DEFINE_CLK_RPMH_VRM(sdm845, ln_bb_clk2, ln_bb_clk2_ao, "lnbclka2", 19200000);
> +DEFINE_CLK_RPMH_VRM(sdm845, ln_bb_clk3, ln_bb_clk3_ao, "lnbclka3", 19200000);
> +DEFINE_CLK_RPMH_VRM(sdm845, rf_clk1, rf_clk1_ao, "rfclka1", 38400000);
> +DEFINE_CLK_RPMH_VRM(sdm845, rf_clk2, rf_clk2_ao, "rfclka2", 38400000);
> +DEFINE_CLK_RPMH_VRM(sdm845, rf_clk3, rf_clk3_ao, "rfclka3", 38400000);
> +
> +static struct clk_hw *sdm845_rpmh_clocks[] = {
> +	[RPMH_CXO_CLK]		= &sdm845_bi_tcxo.hw,
> +	[RPMH_CXO_CLK_A]	= &sdm845_bi_tcxo_ao.hw,
> +	[RPMH_LN_BB_CLK2]	= &sdm845_ln_bb_clk2.hw,
> +	[RPMH_LN_BB_CLK2_A]	= &sdm845_ln_bb_clk2_ao.hw,
> +	[RPMH_LN_BB_CLK3]	= &sdm845_ln_bb_clk3.hw,
> +	[RPMH_LN_BB_CLK3_A]	= &sdm845_ln_bb_clk3_ao.hw,
> +	[RPMH_RF_CLK1]		= &sdm845_rf_clk1.hw,
> +	[RPMH_RF_CLK1_A]	= &sdm845_rf_clk1_ao.hw,
> +	[RPMH_RF_CLK2]		= &sdm845_rf_clk2.hw,
> +	[RPMH_RF_CLK2_A]	= &sdm845_rf_clk2_ao.hw,
> +	[RPMH_RF_CLK3]		= &sdm845_rf_clk3.hw,
> +	[RPMH_RF_CLK3_A]	= &sdm845_rf_clk3_ao.hw,
> +};
> +
> +static const struct clk_rpmh_desc clk_rpmh_sdm845 = {
> +	.clks = sdm845_rpmh_clocks,
> +	.num_clks = ARRAY_SIZE(sdm845_rpmh_clocks),
> +};
> +
> +static int clk_rpmh_probe(struct platform_device *pdev)
> +{
> +	struct clk **clks;
> +	struct clk *clk;
> +	struct rpmh_cc *rcc;
> +	struct clk_onecell_data *data;
> +	struct clk_hw **hw_clks;
> +	struct clk_rpmh *rpmh_clk;
> +	const struct clk_rpmh_desc *desc;
> +	struct rpmh_client *rpmh_client;
> +	struct device *dev;
> +	size_t num_clks, i;
> +	int ret;
> +
> +	dev = &pdev->dev;
> +
> +	ret = cmd_db_ready();
> +	if (ret) {
> +		if (ret != -EPROBE_DEFER) {
> +			dev_err(dev, "Command DB not available (%d)\n",	ret);
> +			goto fail;
> +		}
> +		return ret;
> +	}
> +
> +	rpmh_client = rpmh_get_client(pdev);
> +	if (IS_ERR(rpmh_client)) {
> +		ret = PTR_ERR(rpmh_client);
> +		dev_err(dev, "Failed to request RPMh client, ret=%d\n",	ret);
> +		return ret;
> +	}
> +
> +	desc = of_device_get_match_data(&pdev->dev);
> +	hw_clks = desc->clks;
> +	num_clks = desc->num_clks;
> +
> +	rcc = devm_kzalloc(&pdev->dev, sizeof(*rcc) + sizeof(*clks) * num_clks,
> +			   GFP_KERNEL);
> +	if (!rcc) {
> +		ret = -ENOMEM;
> +		goto err;
> +	}
> +
> +	clks = rcc->clks;
> +	data = &rcc->data;
> +	data->clks = clks;
> +	data->clk_num = num_clks;
> +
> +	for (i = 0; i < num_clks; i++) {
> +		rpmh_clk = to_clk_rpmh(hw_clks[i]);
> +		rpmh_clk->res_addr = cmd_db_read_addr(rpmh_clk->res_name);
> +		if (!rpmh_clk->res_addr) {
> +			dev_err(dev, "missing RPMh resource address for %s\n",
> +					rpmh_clk->res_name);
> +			ret = -ENODEV;
> +			goto err;
> +		}
> +
> +		rpmh_clk->rpmh_client = rpmh_client;
> +
> +		clk = devm_clk_register(&pdev->dev, hw_clks[i]);
> +		if (IS_ERR(clk)) {
> +			ret = PTR_ERR(clk);
> +			dev_err(dev, "failed to register %s\n",
> +					hw_clks[i]->init->name);
> +			goto err;
> +		}
> +
> +		clks[i] = clk;
> +		rpmh_clk->dev = &pdev->dev;
> +	}
> +
> +	ret = of_clk_add_provider(pdev->dev.of_node, of_clk_src_onecell_get,
> +				  data);
> +	if (ret) {
> +		dev_err(dev, "Failed to add clock provider\n");
> +		goto err;
> +	}
> +
> +	dev_dbg(dev, "Registered RPMh clocks\n");
> +
> +	return 0;
> +err:
> +	if (rpmh_client)
> +		rpmh_release(rpmh_client);
> +fail:
> +	dev_err(dev, "Error registering RPMh Clock driver (%d)\n", ret);
> +	return ret;
> +}
> +
> +static int clk_rpmh_remove(struct platform_device *pdev)
> +{
> +	const struct clk_rpmh_desc *desc =
> +			of_device_get_match_data(&pdev->dev);
> +	struct clk_hw **hw_clks = desc->clks;
> +	struct clk_rpmh *rpmh_clk = to_clk_rpmh(hw_clks[0]);
> +
> +	rpmh_release(rpmh_clk->rpmh_client);
> +	of_clk_del_provider(pdev->dev.of_node);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id clk_rpmh_match_table[] = {
> +	{ .compatible = "qcom,sdm845-rpmh-clk", .data = &clk_rpmh_sdm845},
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, clk_rpmh_match_table);
> +
> +static struct platform_driver clk_rpmh_driver = {
> +	.probe		= clk_rpmh_probe,
> +	.remove		= clk_rpmh_remove,
> +	.driver		= {
> +		.name	= "clk-rpmh",
> +		.of_match_table = clk_rpmh_match_table,
> +	},
> +};
> +
> +static int __init clk_rpmh_init(void)
> +{
> +	return platform_driver_register(&clk_rpmh_driver);
> +}
> +subsys_initcall(clk_rpmh_init);
> +
> +static void __exit clk_rpmh_exit(void)
> +{
> +	platform_driver_unregister(&clk_rpmh_driver);
> +}
> +module_exit(clk_rpmh_exit);
> +
> +MODULE_DESCRIPTION("QCOM RPMh Clock Driver");
> +MODULE_LICENSE("GPL v2");
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux