Correct the vendor prefix for qnap, which should be the stock ticker
symbol qnapsz.
Signed-off-by: Ben Peddell <klightspeed@xxxxxxxxxxxxxxxx>
Cc: Anton Vorontsov <anton@xxxxxxxxxx>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
Cc: David Woodhouse <dwmw2@xxxxxxxxxxxxx>
---
Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt | 2 +-
arch/arm/boot/dts/kirkwood-ts219.dtsi | 4 ++--
drivers/power/reset/qnap-poweroff.c | 2 +-
3 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt b/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt
index af25e77..aabda51 100644
--- a/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt
+++ b/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt
@@ -10,7 +10,7 @@ Synology NAS devices use a similar scheme, but a different baud rate,
9600, and a different character, '1'.
Required Properties:
-- compatible: Should be "qnap,power-off" or "synology,power-off"
+- compatible: Should be "qnapsz,power-off" or "synology,power-off"
- reg: Address and length of the register set for UART1
- clocks: tclk clock
diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi
index 911f3a8..0f0892a 100644
--- a/arch/arm/boot/dts/kirkwood-ts219.dtsi
+++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi
@@ -1,6 +1,6 @@
/ {
model = "QNAP TS219 family";
- compatible = "qnap,ts219", "marvell,kirkwood";
+ compatible = "qnapsz,ts219", "marvell,kirkwood";
memory {
device_type = "memory";
@@ -46,7 +46,7 @@
pinctrl-names = "default";
};
poweroff@12100 {
- compatible = "qnap,power-off";
+ compatible = "qnapsz,power-off";
reg = <0x12000 0x100>;
clocks = <&gate_clk 7>;
};
diff --git a/drivers/power/reset/qnap-poweroff.c b/drivers/power/reset/qnap-poweroff.c
index a75db7f..d350ece 100644
--- a/drivers/power/reset/qnap-poweroff.c
+++ b/drivers/power/reset/qnap-poweroff.c
@@ -41,7 +41,7 @@ static const struct power_off_cfg synology_power_off_cfg = {
};
static const struct of_device_id qnap_power_off_of_match_table[] = {
- { .compatible = "qnap,power-off",
+ { .compatible = "qnapsz,power-off",
.data = &qnap_power_off_cfg,
},
{ .compatible = "synology,power-off",
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
