The extra property enables the discovery on the MDIO bus
of the PHYs which have a vendor specific address space
for accessing the C45 MDIO registers.
Signed-off-by: Vicentiu Galanopulo <vicentiu.galanopulo@xxxxxxx>
---
Documentation/devicetree/bindings/net/phy.txt | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/phy.txt b/Documentation/devicetree/bindings/net/phy.txt
index d2169a5..82692e2 100644
--- a/Documentation/devicetree/bindings/net/phy.txt
+++ b/Documentation/devicetree/bindings/net/phy.txt
@@ -61,6 +61,11 @@ Optional Properties:
- reset-deassert-us: Delay after the reset was deasserted in microseconds.
If this property is missing the delay will be skipped.
+- dev-addr: If set, it indicates the device address of the PHY to be used
+ when accessing the C45 PHY registers over MDIO. It is used for vendor specific
+ register space addresses that do no conform to standard address for the MDIO
+ registers (e.g. MMD30)
+
Example:
ethernet-phy@0 {
@@ -72,4 +77,5 @@ ethernet-phy@0 {
reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
reset-assert-us = <1000>;
reset-deassert-us = <2000>;
+ dev-addr = <0x1e>;
};
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
