On 4/12/2018 10:37 AM, Guenter Roeck wrote:
On Thu, Apr 12, 2018 at 10:09:51AM -0700, Jae Hyun Yoo wrote:
[ ... ]
+static int find_core_index(struct peci_cputemp *priv, int channel)
+{
+ int core_channel = channel - DEFAULT_CHANNEL_NUMS;
+ int idx, found = 0;
+
+ for (idx = 0; idx < priv->gen_info->core_max; idx++) {
+ if (priv->core_mask & BIT(idx)) {
+ if (core_channel == found)
+ break;
+
+ found++;
+ }
+ }
+
+ return idx;
What if nothing is found ?
Core temperature group will be registered only when it detects at
least one core checked by check_resolved_cores(), so
find_core_index() can be called only when priv->core_mask has a
non-zero value. The 'nothing is found' case will not happen.
That doesn't guarantee a match. If what you are saying is correct
there should always be
a well defined match of channel -> idx, and the search should be
unnecessary.
There could be some disabled cores in the resolved core mask bit
sequence also it should remove indexing gap in channel numbering so it
is the reason why this search function is needed. Well defined match of
channel -> idx would not be always satisfied.
Are you saying that each call to the function, with the same parameters,
can return a different result ?
No, the result will be consistent. After reading the priv->core_mask once in
check_resolved_cores(), the value will not be changed. I'm saying about this
case, for example if core number 2 is unresolved in total 4 cores, then the
idx order will be '0, 1, 3' but channel order will be '5, 6, 7' without
making any indexing gap.
And you yet you claim that this is not well defined ? Or are you concerned
about the amount of memory consumed by providing an array for the mapping ?
Note that an indexing gap is acceptable and, in many cases, preferred.
If the indexing gap is acceptable, the index search function isn't
needed anymore. I'll fix all relating code to make that use direct
mapping of channel -> idx then. Thanks!
[ ... ]
+
+ dev_dbg(dev, "%s: sensor '%s'\n", dev_name(hwmon_dev),
priv->name);
+
Why does this message display the device name twice ?
For an example, dev_name(hwmon_dev) shows 'hwmon5' and priv->name shows
'peci-cputemp0'.
And dev_dbg() shows another device name. So you'll have something like
peci-cputemp0: hwmon5: sensor 'peci-cputemp0'
Practically it shows like
peci-cputemp 0-30:00: hwmon10: sensor 'peci_cputemp.cpu0'
where 0-30:00 is assigned by peci core.
And what message would you see for cpu1 ?
It shows like
peci-cputemp 0-31:00: hwmon10: sensor 'peci_cputemp.cpu1'
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
