On 2018-04-11 17:43, Andrew F. Davis wrote: > On 04/11/2018 09:15 AM, Peter Rosin wrote: >> This is a current sense amplifier from Analog Devices. >> >> Signed-off-by: Peter Rosin <peda@xxxxxxxxxx> >> --- >> drivers/iio/afe/Kconfig | 3 +- >> drivers/iio/afe/iio-unit-converter.c | 54 ++++++++++++++++++++++++++++++++++++ >> 2 files changed, 56 insertions(+), 1 deletion(-) >> >> diff --git a/drivers/iio/afe/Kconfig b/drivers/iio/afe/Kconfig >> index 642ce4eb12a6..0e10fe8f459a 100644 >> --- a/drivers/iio/afe/Kconfig >> +++ b/drivers/iio/afe/Kconfig >> @@ -10,7 +10,8 @@ config IIO_UNIT_CONVERTER >> depends on OF || COMPILE_TEST >> help >> Say yes here to build support for the IIO unit converter >> - that handles voltage dividers and current sense shunts. >> + that handles voltage dividers, current sense shunts and >> + the LT6106 Current Sense Amplifier from Analog Devices. > > Could work better to split these out into separate drivers. Maybe a > iio-shunt-resistor.c that does just voltage->current with the > appropriate scaling. Then make a a separate lt6106.c. > > "iio-unit-converter.c" isn't really doing what it says it is, it is not > a generic "unit converter" like one would assume. Having the driver name > describe what kind of device it physically represents will be better > when more complex AFEs show up that, for instance, have programmable > gains and need a larger driver. If an AFE needs programming etc, then it is definitely an option to write a specific driver for it. It was never my intention to cover all AFEs in this one driver, only those that make sense. Presumably that ends up being those doing linear scaling and perhaps requiring a change of the iio channel type. Cheers, Peter -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
