Hi Simon-san,
> From: Simon Horman, Sent: Wednesday, April 11, 2018 4:28 PM
>
> On Tue, Apr 10, 2018 at 09:13:53PM +0900, Yoshihiro Shimoda wrote:
<snip>
> > This patch adds a new property to ignore the ID signal on a board.
> >
> > Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
> > ---
> > Documentation/devicetree/bindings/usb/renesas_usb3.txt | 2 ++
> > drivers/usb/gadget/udc/renesas_usb3.c | 10 ++++++++++
> > 2 files changed, 12 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/usb/renesas_usb3.txt
> b/Documentation/devicetree/bindings/usb/renesas_usb3.txt
> > index 2c071bb..53949bd 100644
> > --- a/Documentation/devicetree/bindings/usb/renesas_usb3.txt
> > +++ b/Documentation/devicetree/bindings/usb/renesas_usb3.txt
> > @@ -19,6 +19,8 @@ Required properties:
> > Optional properties:
> > - phys: phandle + phy specifier pair
> > - phy-names: must be "usb"
> > + - renesas,ignore-id: when a board doesn't use ID pin, you can add this
> > + property to ignore the ID state.
> >
> > Example of R-Car H3 ES1.x:
> > usb3_peri0: usb@ee020000 {
> > diff --git a/drivers/usb/gadget/udc/renesas_usb3.c b/drivers/usb/gadget/udc/renesas_usb3.c
> > index 409cde4..59e1485 100644
> > --- a/drivers/usb/gadget/udc/renesas_usb3.c
> > +++ b/drivers/usb/gadget/udc/renesas_usb3.c
> > @@ -350,6 +350,7 @@ struct renesas_usb3 {
> > bool extcon_host; /* check id and set EXTCON_USB_HOST */
> > bool extcon_usb; /* check vbus and set EXTCON_USB */
> > bool forced_b_device;
> > + bool ignore_id;
> > };
> >
> > #define gadget_to_renesas_usb3(_gadget) \
> > @@ -645,6 +646,9 @@ static void usb3_check_vbus(struct renesas_usb3 *usb3)
> >
> > static void usb3_set_mode(struct renesas_usb3 *usb3, bool host)
> > {
> > + if (usb3->ignore_id && !usb3->forced_b_device)
> > + return;
> > +
> > if (host)
> > usb3_clear_bit(usb3, DRD_CON_PERI_CON, USB3_DRD_CON);
> > else
> > @@ -675,6 +679,9 @@ static void usb3_mode_config(struct renesas_usb3 *usb3, bool host, bool a_dev)
> >
> > static bool usb3_is_a_device(struct renesas_usb3 *usb3)
> > {
> > + if (usb3->ignore_id)
> > + return false;
> > +
> > return !(usb3_read(usb3, USB3_USB_OTG_STA) & USB_OTG_IDMON);
> > }
> >
> > @@ -2632,6 +2639,9 @@ static int renesas_usb3_probe(struct platform_device *pdev)
> > if (ret < 0)
> > goto err_add_udc;
> >
> > + if (of_property_read_bool(pdev->dev.of_node, "renesas,no-id"))
> > + usb3->ignore_id = true;
>
> I wonder if this is better expressed as:
>
> usb3->ignore_id = of_property_read_bool(pdev->dev.of_node,
> "renesas,no-id"));
Thank you for the pointed out! I agree with you.
However, I would like to recall this adding property for now because
I'm thinking that the OF graph of usb-connector can assume this via connector-type
instead of such a local property. So, I'll try to use the usb-connector bindings on
this driver.
Best regards,
Yoshihiro Shimoda
> > +
> > ret = device_create_file(&pdev->dev, &dev_attr_role);
> > if (ret < 0)
> > goto err_dev_create;
> > --
> > 1.9.1
> >
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
