[PATCH 1/2] usb: gadget: udc: renesas_usb3: add property "renesas,ignore-id"

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch adds a new property to ignore the ID signal on a board.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
---
 Documentation/devicetree/bindings/usb/renesas_usb3.txt |  2 ++
 drivers/usb/gadget/udc/renesas_usb3.c                  | 10 ++++++++++
 2 files changed, 12 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/renesas_usb3.txt b/Documentation/devicetree/bindings/usb/renesas_usb3.txt
index 2c071bb..53949bd 100644
--- a/Documentation/devicetree/bindings/usb/renesas_usb3.txt
+++ b/Documentation/devicetree/bindings/usb/renesas_usb3.txt
@@ -19,6 +19,8 @@ Required properties:
 Optional properties:
   - phys: phandle + phy specifier pair
   - phy-names: must be "usb"
+  - renesas,ignore-id: when a board doesn't use ID pin, you can add this
+		       property to ignore the ID state.
 
 Example of R-Car H3 ES1.x:
 	usb3_peri0: usb@ee020000 {
diff --git a/drivers/usb/gadget/udc/renesas_usb3.c b/drivers/usb/gadget/udc/renesas_usb3.c
index 409cde4..59e1485 100644
--- a/drivers/usb/gadget/udc/renesas_usb3.c
+++ b/drivers/usb/gadget/udc/renesas_usb3.c
@@ -350,6 +350,7 @@ struct renesas_usb3 {
 	bool extcon_host;		/* check id and set EXTCON_USB_HOST */
 	bool extcon_usb;		/* check vbus and set EXTCON_USB */
 	bool forced_b_device;
+	bool ignore_id;
 };
 
 #define gadget_to_renesas_usb3(_gadget)	\
@@ -645,6 +646,9 @@ static void usb3_check_vbus(struct renesas_usb3 *usb3)
 
 static void usb3_set_mode(struct renesas_usb3 *usb3, bool host)
 {
+	if (usb3->ignore_id && !usb3->forced_b_device)
+		return;
+
 	if (host)
 		usb3_clear_bit(usb3, DRD_CON_PERI_CON, USB3_DRD_CON);
 	else
@@ -675,6 +679,9 @@ static void usb3_mode_config(struct renesas_usb3 *usb3, bool host, bool a_dev)
 
 static bool usb3_is_a_device(struct renesas_usb3 *usb3)
 {
+	if (usb3->ignore_id)
+		return false;
+
 	return !(usb3_read(usb3, USB3_USB_OTG_STA) & USB_OTG_IDMON);
 }
 
@@ -2632,6 +2639,9 @@ static int renesas_usb3_probe(struct platform_device *pdev)
 	if (ret < 0)
 		goto err_add_udc;
 
+	if (of_property_read_bool(pdev->dev.of_node, "renesas,no-id"))
+		usb3->ignore_id = true;
+
 	ret = device_create_file(&pdev->dev, &dev_attr_role);
 	if (ret < 0)
 		goto err_dev_create;
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux