Re: [PATCH v3 1/2] phy: Add QMP phy based UFS phy support for sdm845

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Can,


On 3/27/2018 12:48 PM, Can Guo wrote:
Add UFS PHY support to make SDM845 UFS work with common PHY framework.

Signed-off-by: Can Guo <cang@xxxxxxxxxxxxxx>
---
  drivers/phy/qualcomm/phy-qcom-qmp.c | 130 +++++++++++++++++++++++++++++++++---
  drivers/phy/qualcomm/phy-qcom-qmp.h |   8 +++
  2 files changed, 127 insertions(+), 11 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index 5cf2c3c..0b58030 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -156,6 +156,11 @@ enum qphy_reg_layout {
  	[QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x170,
  };
+static const unsigned int sdm845_ufsphy_regs_layout[] = {
+	[QPHY_START_CTRL]		= 0x00,
+	[QPHY_PCS_READY_STATUS]		= 0x168,
+};
+
  static const struct qmp_phy_init_tbl msm8996_pcie_serdes_tbl[] = {
  	QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x1c),
  	QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10),
@@ -601,6 +606,73 @@ enum qphy_reg_layout {
  	QMP_PHY_INIT_CFG(QPHY_V3_PCS_REFGEN_REQ_CONFIG2, 0x60),
  };
+static const struct qmp_phy_init_tbl sdm845_ufsphy_serdes_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0xd5),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL, 0x20),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_CTRL, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x05),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_INITVAL1, 0xff),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_INITVAL2, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xda),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0xff),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0c),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE1, 0x98),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE1, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE1, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE1, 0x36),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE1, 0x3f),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE1, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE1, 0xc1),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE1, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE1, 0x32),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE1, 0x0f),
+
+	/* Rate B */
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x44),
+};
+
+static const struct qmp_phy_init_tbl sdm845_ufsphy_tx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x06),
+};
+
+static const struct qmp_phy_init_tbl sdm845_ufsphy_rx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_LVL, 0x24),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_INTERFACE_MODE, 0x40),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_TERM_BW, 0x5b),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1d),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN_HALF, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN_QUARTER, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x81),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x80),
+};
+
+static const struct qmp_phy_init_tbl sdm845_ufsphy_pcs_tbl[] = {
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_DOWN_CONTROL, 0x01),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_MULTI_LANE_CTRL1, 0x02),
+};
/* struct qmp_phy_cfg - per-PHY initialization config */
  struct qmp_phy_cfg {
@@ -652,6 +724,9 @@ struct qmp_phy_cfg {
  	/* Register offset of secondary tx/rx lanes for USB DP combo PHY */
  	unsigned int tx_b_lane_offset;
  	unsigned int rx_b_lane_offset;
+
+	/* true, if PCS block has no separate SW_RESET register */
+	bool skip_sw_rst;
  };
/**
@@ -748,6 +823,10 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
  	"aux", "cfg_ahb", "ref", "com_aux",
  };
+static const char * const sdm845_ufs_phy_clk_l[] = {
+	"ref",

did you miss adding 'ref_aux' clock here as in the v2 version?
Rest looks good. After this change, you can add my reviewed-by
Reviewed-by: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx>

Thanks
Vivek
+};
+
  /* list of resets */
  static const char * const msm8996_pciephy_reset_l[] = {
  	"phy", "common", "cfg",
@@ -758,7 +837,7 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
  };
/* list of regulators */
-static const char * const msm8996_phy_vreg_l[] = {
+static const char * const qmp_phy_vreg_l[] = {
  	"vdda-phy", "vdda-pll",
  };
@@ -778,8 +857,8 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
  	.num_clks		= ARRAY_SIZE(msm8996_phy_clk_l),
  	.reset_list		= msm8996_pciephy_reset_l,
  	.num_resets		= ARRAY_SIZE(msm8996_pciephy_reset_l),
-	.vreg_list		= msm8996_phy_vreg_l,
-	.num_vregs		= ARRAY_SIZE(msm8996_phy_vreg_l),
+	.vreg_list		= qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
  	.regs			= pciephy_regs_layout,
.start_ctrl = PCS_START | PLL_READY_GATE_EN,
@@ -809,8 +888,8 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
  	.num_clks		= ARRAY_SIZE(msm8996_phy_clk_l),
  	.reset_list		= msm8996_usb3phy_reset_l,
  	.num_resets		= ARRAY_SIZE(msm8996_usb3phy_reset_l),
-	.vreg_list		= msm8996_phy_vreg_l,
-	.num_vregs		= ARRAY_SIZE(msm8996_phy_vreg_l),
+	.vreg_list		= qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
  	.regs			= usb3phy_regs_layout,
.start_ctrl = SERDES_START | PCS_START,
@@ -870,8 +949,8 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
  	.num_clks		= ARRAY_SIZE(qmp_v3_phy_clk_l),
  	.reset_list		= msm8996_usb3phy_reset_l,
  	.num_resets		= ARRAY_SIZE(msm8996_usb3phy_reset_l),
-	.vreg_list		= msm8996_phy_vreg_l,
-	.num_vregs		= ARRAY_SIZE(msm8996_phy_vreg_l),
+	.vreg_list		= qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
  	.regs			= qmp_v3_usb3phy_regs_layout,
.start_ctrl = SERDES_START | PCS_START,
@@ -903,8 +982,8 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
  	.num_clks		= ARRAY_SIZE(qmp_v3_phy_clk_l),
  	.reset_list		= msm8996_usb3phy_reset_l,
  	.num_resets		= ARRAY_SIZE(msm8996_usb3phy_reset_l),
-	.vreg_list		= msm8996_phy_vreg_l,
-	.num_vregs		= ARRAY_SIZE(msm8996_phy_vreg_l),
+	.vreg_list		= qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
  	.regs			= qmp_v3_usb3phy_regs_layout,
.start_ctrl = SERDES_START | PCS_START,
@@ -916,6 +995,30 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
  	.pwrdn_delay_max	= POWER_DOWN_DELAY_US_MAX,
  };
+static const struct qmp_phy_cfg sdm845_ufsphy_cfg = {
+	.type			= PHY_TYPE_UFS,
+	.nlanes			= 2,
+
+	.serdes_tbl		= sdm845_ufsphy_serdes_tbl,
+	.serdes_tbl_num		= ARRAY_SIZE(sdm845_ufsphy_serdes_tbl),
+	.tx_tbl			= sdm845_ufsphy_tx_tbl,
+	.tx_tbl_num		= ARRAY_SIZE(sdm845_ufsphy_tx_tbl),
+	.rx_tbl			= sdm845_ufsphy_rx_tbl,
+	.rx_tbl_num		= ARRAY_SIZE(sdm845_ufsphy_rx_tbl),
+	.pcs_tbl		= sdm845_ufsphy_pcs_tbl,
+	.pcs_tbl_num		= ARRAY_SIZE(sdm845_ufsphy_pcs_tbl),
+	.clk_list		= sdm845_ufs_phy_clk_l,
+	.num_clks		= ARRAY_SIZE(sdm845_ufs_phy_clk_l),
+	.vreg_list		= qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
+	.regs			= sdm845_ufsphy_regs_layout,
+
+	.start_ctrl		= SERDES_START,
+	.pwrdn_ctrl		= SW_PWRDN,
+	.mask_pcs_ready		= PCS_READY,
+	.skip_sw_rst		= true,
+};
+
  static void qcom_qmp_phy_configure(void __iomem *base,
  				   const unsigned int *regs,
  				   const struct qmp_phy_init_tbl tbl[],
@@ -1140,7 +1243,8 @@ static int qcom_qmp_phy_init(struct phy *phy)
  		usleep_range(cfg->pwrdn_delay_min, cfg->pwrdn_delay_max);
/* Pull PHY out of reset state */
-	qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
+	if (!cfg->skip_sw_rst)
+		qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
  	if (cfg->has_phy_dp_com_ctrl)
  		qphy_clrbits(dp_com, QPHY_V3_DP_COM_SW_RESET, SW_RESET);
@@ -1178,7 +1282,8 @@ static int qcom_qmp_phy_exit(struct phy *phy)
  	clk_disable_unprepare(qphy->pipe_clk);
/* PHY reset */
-	qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
+	if (!cfg->skip_sw_rst)
+		qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
/* stop SerDes and Phy-Coding-Sublayer */
  	qphy_clrbits(qphy->pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl);
@@ -1531,6 +1636,9 @@ int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id)
  	}, {
  		.compatible = "qcom,sdm845-qmp-usb3-uni-phy",
  		.data = &qmp_v3_usb3_uniphy_cfg,
+	}, {
+		.compatible = "qcom,sdm845-qmp-ufs-phy",
+		.data = &sdm845_ufsphy_cfg,
  	},
  	{ },
  };
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index 5d78d43..3cbcfe1 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -184,6 +184,8 @@
  #define QSERDES_V3_COM_VCO_TUNE2_MODE0			0x0f8
  #define QSERDES_V3_COM_VCO_TUNE1_MODE1			0x0fc
  #define QSERDES_V3_COM_VCO_TUNE2_MODE1			0x100
+#define QSERDES_V3_COM_VCO_TUNE_INITVAL1		0x104
+#define QSERDES_V3_COM_VCO_TUNE_INITVAL2		0x108
  #define QSERDES_V3_COM_VCO_TUNE_TIMER1			0x11c
  #define QSERDES_V3_COM_VCO_TUNE_TIMER2			0x120
  #define QSERDES_V3_COM_CLK_SELECT			0x138
@@ -211,8 +213,13 @@
  /* Only for QMP V3 PHY - RX registers */
  #define QSERDES_V3_RX_UCDR_SO_GAIN_HALF			0x00c
  #define QSERDES_V3_RX_UCDR_SO_GAIN			0x014
+#define QSERDES_V3_RX_UCDR_SVS_SO_GAIN_HALF		0x024
+#define QSERDES_V3_RX_UCDR_SVS_SO_GAIN_QUARTER		0x028
+#define QSERDES_V3_RX_UCDR_SVS_SO_GAIN			0x02c
  #define QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN		0x030
  #define QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE	0x034
+#define QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW		0x03c
+#define QSERDES_V3_RX_UCDR_PI_CONTROLS			0x044
  #define QSERDES_V3_RX_RX_TERM_BW			0x07c
  #define QSERDES_V3_RX_VGA_CAL_CNTRL1			0x0bc
  #define QSERDES_V3_RX_VGA_CAL_CNTRL2			0x0c0
@@ -275,6 +282,7 @@
  #define QPHY_V3_PCS_FLL_CNT_VAL_L			0x0cc
  #define QPHY_V3_PCS_FLL_CNT_VAL_H_TOL			0x0d0
  #define QPHY_V3_PCS_FLL_MAN_CODE			0x0d4
+#define QPHY_V3_PCS_MULTI_LANE_CTRL1			0x1c4
  #define QPHY_V3_PCS_RX_SIGDET_LVL			0x1d8
  #define QPHY_V3_PCS_REFGEN_REQ_CONFIG1			0x20c
  #define QPHY_V3_PCS_REFGEN_REQ_CONFIG2			0x210

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux