Add "socionext,syscon-phy-mode" property to specify system controller that
configures the settings about phy-mode.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx>
---
Documentation/devicetree/bindings/net/socionext,uniphier-ave4.txt | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.txt b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.txt
index 85e0c49..fc8f017 100644
--- a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.txt
+++ b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.txt
@@ -13,7 +13,8 @@ Required properties:
- reg: Address where registers are mapped and size of region.
- interrupts: Should contain the MAC interrupt.
- phy-mode: See ethernet.txt in the same directory. Allow to choose
- "rgmii", "rmii", or "mii" according to the PHY.
+ "rgmii", "rmii", "mii", or "internal" according to the PHY.
+ The acceptable mode is SoC-dependent.
- phy-handle: Should point to the external phy device.
See ethernet.txt file in the same directory.
- clocks: A phandle to the clock for the MAC.
@@ -27,6 +28,8 @@ Required properties:
- reset-names: Should contain
- "ether", "gio" for Pro4 SoC
- "ether" for others
+ - socionext,syscon-phy-mode: A phandle to syscon with one argument
+ that configures phy mode. The argument is the ID of MAC instance.
Optional properties:
- local-mac-address: See ethernet.txt in the same directory.
@@ -47,6 +50,7 @@ Example:
clocks = <&sys_clk 6>;
reset-names = "ether";
resets = <&sys_rst 6>;
+ socionext,syscon-phy-mode = <&soc_glue 0>;
local-mac-address = [00 00 00 00 00 00];
mdio {
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
