Re: [PATCH v2 2/5] usb: typec: fusb302: remove max_snk_* for sink config

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On 04-04-18 14:06, Mats Karrman wrote:
Hi Li,

On 2018-03-23 15:58, Li Jun wrote:

Since max_snk_* is to be deprecated, so remove max_snk_* by adding a
variable PDO for sink config.

Signed-off-by: Li Jun <jun.li@xxxxxxx>
---
  drivers/usb/typec/fusb302/fusb302.c | 51 +++++++++++++++++++++++++++----------
  1 file changed, 37 insertions(+), 14 deletions(-)

diff --git a/drivers/usb/typec/fusb302/fusb302.c b/drivers/usb/typec/fusb302/fusb302.c
index 7036171..db4d9cd 100644
--- a/drivers/usb/typec/fusb302/fusb302.c
+++ b/drivers/usb/typec/fusb302/fusb302.c
@@ -120,6 +120,7 @@ struct fusb302_chip {
      enum typec_cc_polarity cc_polarity;
      enum typec_cc_status cc1;
      enum typec_cc_status cc2;
+    u32 snk_pdo[PDO_MAX_OBJECTS];
  #ifdef CONFIG_DEBUG_FS
      struct dentry *dentry;
@@ -1212,11 +1213,6 @@ static const u32 snk_pdo[] = {
  static const struct tcpc_config fusb302_tcpc_config = {
      .src_pdo = src_pdo,
      .nr_src_pdo = ARRAY_SIZE(src_pdo),
-    .snk_pdo = snk_pdo,
-    .nr_snk_pdo = ARRAY_SIZE(snk_pdo),
-    .max_snk_mv = 5000,
-    .max_snk_ma = 3000,
-    .max_snk_mw = 15000,
      .operating_snk_mw = 2500,
      .type = TYPEC_PORT_DRP,
      .data = TYPEC_PORT_DRD,
@@ -1756,6 +1752,38 @@ static int init_gpio(struct fusb302_chip *chip)
      return 0;
  }
+static int fusb302_composite_snk_pdo_array(struct fusb302_chip *chip)
+{
+    struct device *dev = chip->dev;
+    u32 mv, ma, mw, min_mv;
+    unsigned int i;
+
+    /* Copy the static snk pdo */
+    for (i = 0; i < ARRAY_SIZE(snk_pdo); i++)
+        chip->snk_pdo[i] = snk_pdo[i];
+
+    if (device_property_read_u32(dev, "fcs,max-sink-microvolt", &mv) ||
+        device_property_read_u32(dev, "fcs,max-sink-microamp", &ma) ||
+        device_property_read_u32(dev, "fcs,max-sink-microwatt", &mw))
+        return i;
+
+    mv = mv / 1000;
+    ma = ma / 1000;
+    mw = mw / 1000;
+
+    min_mv = 1000 * chip->tcpc_config.operating_snk_mw / ma;
+    if (pdo_type(snk_pdo[i-1] == PDO_TYPE_FIXED))

You've got the parentheses wrong.

Apart from that I don't like/understand why the PDO's should be fixed.
Every product should be able to have its own settings, including the first PDO (e.g. it
might need to specify a higher current and/or set the "Higher Capability" bit).

I think this would be best solved the same way as in your TCPCI driver patch series [1]
with a list freely specified by a property.

[1] https://www.spinics.net/lists/linux-usb/msg167398.html

Hmm, interesting, for the x86 use-case that would require updating
the properties for the fusb302 defined in:

drivers/platform/x86/intel_cht_int33fe.c

In tandem, which is easily doable.

But what about other users of the fusb302 driver? Since this driver
was added before I started using it for some x86 boards, I assume
there are some non x86 users, so we should preserve compatibility
for DTB files which don't define any sink PDOs in their properties,
I guess we could fall to a default fixed 5V sink pdo for those.

Regards,

Hans




+        min_mv = max(min_mv, pdo_fixed_voltage(snk_pdo[i-1]));
+    else
+        min_mv = max(min_mv, pdo_max_voltage(snk_pdo[i-1]));
+    ma = min(ma, 1000 * mw / min_mv);
+
+    /* Insert the new pdo to the end */
+    chip->snk_pdo[i] = PDO_VAR(min_mv, mv, ma);
+
+    return i+1;
+}
+
  static int fusb302_probe(struct i2c_client *client,
               const struct i2c_device_id *id)
  {
@@ -1784,18 +1812,13 @@ static int fusb302_probe(struct i2c_client *client,
      chip->tcpc_dev.config = &chip->tcpc_config;
      mutex_init(&chip->lock);
-    if (!device_property_read_u32(dev, "fcs,max-sink-microvolt", &v))
-        chip->tcpc_config.max_snk_mv = v / 1000;
-
-    if (!device_property_read_u32(dev, "fcs,max-sink-microamp", &v))
-        chip->tcpc_config.max_snk_ma = v / 1000;
-
-    if (!device_property_read_u32(dev, "fcs,max-sink-microwatt", &v))
-        chip->tcpc_config.max_snk_mw = v / 1000;
-
      if (!device_property_read_u32(dev, "fcs,operating-sink-microwatt", &v))
          chip->tcpc_config.operating_snk_mw = v / 1000;
+    /* Composite sink PDO */
+    chip->tcpc_config.nr_snk_pdo = fusb302_composite_snk_pdo_array(chip);
+    chip->tcpc_config.snk_pdo = chip->snk_pdo;
+
      /*
       * Devicetree platforms should get extcon via phandle (not yet
       * supported). On ACPI platforms, we get the name from a device prop.

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux