Hi Li,
On 2018-03-23 15:58, Li Jun wrote:
Since max_snk_* is to be deprecated, so remove max_snk_* by adding a
variable PDO for sink config.
Signed-off-by: Li Jun <jun.li@xxxxxxx>
---
drivers/usb/typec/fusb302/fusb302.c | 51 +++++++++++++++++++++++++++----------
1 file changed, 37 insertions(+), 14 deletions(-)
diff --git a/drivers/usb/typec/fusb302/fusb302.c b/drivers/usb/typec/fusb302/fusb302.c
index 7036171..db4d9cd 100644
--- a/drivers/usb/typec/fusb302/fusb302.c
+++ b/drivers/usb/typec/fusb302/fusb302.c
@@ -120,6 +120,7 @@ struct fusb302_chip {
enum typec_cc_polarity cc_polarity;
enum typec_cc_status cc1;
enum typec_cc_status cc2;
+ u32 snk_pdo[PDO_MAX_OBJECTS];
#ifdef CONFIG_DEBUG_FS
struct dentry *dentry;
@@ -1212,11 +1213,6 @@ static const u32 snk_pdo[] = {
static const struct tcpc_config fusb302_tcpc_config = {
.src_pdo = src_pdo,
.nr_src_pdo = ARRAY_SIZE(src_pdo),
- .snk_pdo = snk_pdo,
- .nr_snk_pdo = ARRAY_SIZE(snk_pdo),
- .max_snk_mv = 5000,
- .max_snk_ma = 3000,
- .max_snk_mw = 15000,
.operating_snk_mw = 2500,
.type = TYPEC_PORT_DRP,
.data = TYPEC_PORT_DRD,
@@ -1756,6 +1752,38 @@ static int init_gpio(struct fusb302_chip *chip)
return 0;
}
+static int fusb302_composite_snk_pdo_array(struct fusb302_chip *chip)
+{
+ struct device *dev = chip->dev;
+ u32 mv, ma, mw, min_mv;
+ unsigned int i;
+
+ /* Copy the static snk pdo */
+ for (i = 0; i < ARRAY_SIZE(snk_pdo); i++)
+ chip->snk_pdo[i] = snk_pdo[i];
+
+ if (device_property_read_u32(dev, "fcs,max-sink-microvolt", &mv) ||
+ device_property_read_u32(dev, "fcs,max-sink-microamp", &ma) ||
+ device_property_read_u32(dev, "fcs,max-sink-microwatt", &mw))
+ return i;
+
+ mv = mv / 1000;
+ ma = ma / 1000;
+ mw = mw / 1000;
+
+ min_mv = 1000 * chip->tcpc_config.operating_snk_mw / ma;
+ if (pdo_type(snk_pdo[i-1] == PDO_TYPE_FIXED))
You've got the parentheses wrong.
Apart from that I don't like/understand why the PDO's should be fixed.
Every product should be able to have its own settings, including the first PDO (e.g. it
might need to specify a higher current and/or set the "Higher Capability" bit).
I think this would be best solved the same way as in your TCPCI driver patch series [1]
with a list freely specified by a property.
[1] https://www.spinics.net/lists/linux-usb/msg167398.html
+ min_mv = max(min_mv, pdo_fixed_voltage(snk_pdo[i-1]));
+ else
+ min_mv = max(min_mv, pdo_max_voltage(snk_pdo[i-1]));
+ ma = min(ma, 1000 * mw / min_mv);
+
+ /* Insert the new pdo to the end */
+ chip->snk_pdo[i] = PDO_VAR(min_mv, mv, ma);
+
+ return i+1;
+}
+
static int fusb302_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -1784,18 +1812,13 @@ static int fusb302_probe(struct i2c_client *client,
chip->tcpc_dev.config = &chip->tcpc_config;
mutex_init(&chip->lock);
- if (!device_property_read_u32(dev, "fcs,max-sink-microvolt", &v))
- chip->tcpc_config.max_snk_mv = v / 1000;
-
- if (!device_property_read_u32(dev, "fcs,max-sink-microamp", &v))
- chip->tcpc_config.max_snk_ma = v / 1000;
-
- if (!device_property_read_u32(dev, "fcs,max-sink-microwatt", &v))
- chip->tcpc_config.max_snk_mw = v / 1000;
-
if (!device_property_read_u32(dev, "fcs,operating-sink-microwatt", &v))
chip->tcpc_config.operating_snk_mw = v / 1000;
+ /* Composite sink PDO */
+ chip->tcpc_config.nr_snk_pdo = fusb302_composite_snk_pdo_array(chip);
+ chip->tcpc_config.snk_pdo = chip->snk_pdo;
+
/*
* Devicetree platforms should get extcon via phandle (not yet
* supported). On ACPI platforms, we get the name from a device prop.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
