Update binding to integrate the backlight feature directly into
the main node, as suggested by Rob Herring.
Signed-off-by: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
---
Documentation/devicetree/bindings/mfd/ti-lmu.txt | 119 ++++++++++++-----------
1 file changed, 60 insertions(+), 59 deletions(-)
diff --git a/Documentation/devicetree/bindings/mfd/ti-lmu.txt b/Documentation/devicetree/bindings/mfd/ti-lmu.txt
index c885cf89b8ce..b3433e95dfa5 100644
--- a/Documentation/devicetree/bindings/mfd/ti-lmu.txt
+++ b/Documentation/devicetree/bindings/mfd/ti-lmu.txt
@@ -28,10 +28,9 @@ Required properties:
Optional property:
- enable-gpios: A GPIO specifier for hardware enable pin.
-
-Required node:
- - backlight: All LMU devices have backlight child nodes.
- For the properties, please refer to [1].
+ - pwm-names: Should be either "lmu-backlight" or unset
+ - pwm: This should be a PWM specifier following ../pwm/pwm.txt and must
+ only be specified, if the backlight should be used in PWM mode.
Optional nodes:
- fault-monitor: Hardware fault monitoring driver for LM3633 and LM3697.
@@ -42,8 +41,31 @@ Optional nodes:
- leds: LED properties for LM3633. Please refer to [2].
- regulators: Regulator properties for LM3631 and LM3632.
Please refer to [3].
+ - bank0, bank1, bank2: This contains the backlight configuration
+ for each backlight control bank.
+
+Required properties in the bank subnodes:
+ - label: A string describing the backlight. Should contain "keyboard"
+ for a keyboard backlight and "lcd" for LCD panel backlights.
+ - ti,led-sources: A list of channels, that should be driven. Each channel
+ should only be driven by one bank.
+
+Optional properties in the bank subnodes:
+ - default-brightness-level: Backlight initial brightness value.
+ Type is <u32>. It is set as soon as backlight
+ device is created.
+ 0 ~ 2047 = LM3631, LM3632, LM3633, LM3695 and
+ LM3697
+ 0 ~ 255 = LM3532
+ - ti,ramp-up-ms, ti,ramp-down-ms: Light dimming effect properties.
+ Type is <u32>. Unit is millisecond.
+ 0 ~ 65 ms = LM3532
+ 0 ~ 4000 ms = LM3631
+ 0 ~ 16000 ms = LM3633 and LM3697
+ - pwm-period: PWM period. Only valid in PWM brightness mode.
+ Type is <u32>. If this property is missing, then control
+ mode is set to I2C by default.
-[1] ../leds/backlight/ti-lmu-backlight.txt
[2] ../leds/leds-lm3633.txt
[3] ../regulator/lm363x-regulator.txt
@@ -53,14 +75,11 @@ lm3532@38 {
enable-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>;
- backlight {
- compatible = "ti,lm3532-backlight";
-
- lcd {
- led-sources = <0 1 2>;
- ramp-up-msec = <30>;
- ramp-down-msec = <0>;
- };
+ bank0 {
+ label = "lcd";
+ led-sources = <0 1 2>;
+ ramp-up-msec = <30>;
+ ramp-down-msec = <0>;
};
};
@@ -105,13 +124,10 @@ lm3631@29 {
};
};
- backlight {
- compatible = "ti,lm3631-backlight";
-
- lcd_bl {
- led-sources = <0 1>;
- ramp-up-msec = <300>;
- };
+ bank0 {
+ label = "lcd_bl";
+ led-sources = <0 1>;
+ ramp-up-msec = <300>;
};
};
@@ -147,16 +163,13 @@ lm3632@11 {
};
};
- backlight {
- compatible = "ti,lm3632-backlight";
-
- pwms = <&pwm0 0 10000 0>; /* pwm number, period, polarity */
- pwm-names = "lmu-backlight";
+ pwms = <&pwm0 0 10000 0>; /* pwm number, period, polarity */
+ pwm-names = "lmu-backlight";
- lcd {
- led-sources = <0 1>;
- pwm-period = <10000>;
- };
+ bank0 {
+ label = "lcd";
+ led-sources = <0 1>;
+ pwm-period = <10000>;
};
};
@@ -166,22 +179,18 @@ lm3633@36 {
enable-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>;
- backlight {
- compatible = "ti,lm3633-backlight";
-
- main {
- label = "main_lcd";
- led-sources = <1 2>;
- ramp-up-msec = <500>;
- ramp-down-msec = <500>;
- };
+ bank0 {
+ label = "main_lcd";
+ led-sources = <1 2>;
+ ramp-up-msec = <500>;
+ ramp-down-msec = <500>;
+ };
- front {
- label = "front_lcd";
- led-sources = <0>;
- ramp-up-msec = <1000>;
- ramp-down-msec = <0>;
- };
+ bank1 {
+ label = "front_lcd";
+ led-sources = <0>;
+ ramp-up-msec = <1000>;
+ ramp-down-msec = <0>;
};
leds {
@@ -211,13 +220,9 @@ lm3695@63 {
enable-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>;
- backlight {
- compatible = "ti,lm3695-backlight";
-
- lcd {
- label = "bl";
- led-sources = <0 1>;
- };
+ bank0 {
+ label = "lcd_bl";
+ led-sources = <0 1>;
};
};
@@ -227,14 +232,10 @@ lm3697@36 {
enable-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>;
- backlight {
- compatible = "ti,lm3697-backlight";
-
- lcd {
- led-sources = <0 1 2>;
- ramp-up-msec = <200>;
- ramp-down-msec = <200>;
- };
+ bank0 {
+ led-sources = <0 1 2>;
+ ramp-up-msec = <200>;
+ ramp-down-msec = <200>;
};
fault-monitor {
--
2.16.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
