2018-03-29 0:30 GMT+02:00 Suman Anna <s-anna@xxxxxx>:
> Hi Bart,
>
> On 03/27/2018 04:20 AM, Bartosz Golaszewski wrote:
>> From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
>>
>> Switch to using the reset framework instead of handcoded reset routines
>> we used so far.
>>
>> Signed-off-by: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
>> ---
>> drivers/remoteproc/da8xx_remoteproc.c | 33 ++++++++++++++++++++++++++++-----
>> 1 file changed, 28 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/remoteproc/da8xx_remoteproc.c b/drivers/remoteproc/da8xx_remoteproc.c
>> index b668e32996e2..788f59809c02 100644
>> --- a/drivers/remoteproc/da8xx_remoteproc.c
>> +++ b/drivers/remoteproc/da8xx_remoteproc.c
>> @@ -10,6 +10,7 @@
>>
>> #include <linux/bitops.h>
>> #include <linux/clk.h>
>> +#include <linux/reset.h>
>> #include <linux/err.h>
>> #include <linux/interrupt.h>
>> #include <linux/io.h>
>> @@ -20,8 +21,6 @@
>> #include <linux/platform_device.h>
>> #include <linux/remoteproc.h>
>>
>> -#include <mach/clock.h> /* for davinci_clk_reset_assert/deassert() */
>> -
>> #include "remoteproc_internal.h"
>>
>> static char *da8xx_fw_name;
>> @@ -72,6 +71,7 @@ struct da8xx_rproc {
>> struct da8xx_rproc_mem *mem;
>> int num_mems;
>> struct clk *dsp_clk;
>> + struct reset_control *dsp_reset;
>> void (*ack_fxn)(struct irq_data *data);
>> struct irq_data *irq_data;
>> void __iomem *chipsig;
>> @@ -138,6 +138,7 @@ static int da8xx_rproc_start(struct rproc *rproc)
>> struct device *dev = rproc->dev.parent;
>> struct da8xx_rproc *drproc = (struct da8xx_rproc *)rproc->priv;
>> struct clk *dsp_clk = drproc->dsp_clk;
>> + struct reset_control *dsp_reset = drproc->dsp_reset;
>> int ret;
>>
>> /* hw requires the start (boot) address be on 1KB boundary */
>> @@ -155,7 +156,12 @@ static int da8xx_rproc_start(struct rproc *rproc)
>> return ret;
>> }
>>
>> - davinci_clk_reset_deassert(dsp_clk);
>> + ret = reset_control_deassert(dsp_reset);
>> + if (ret) {
>> + dev_err(dev, "reset_control_deassert() failed: %d\n", ret);
>> + clk_disable_unprepare(dsp_clk);
>> + return ret;
>> + }
>>
>> return 0;
>> }
>> @@ -163,8 +169,15 @@ static int da8xx_rproc_start(struct rproc *rproc)
>> static int da8xx_rproc_stop(struct rproc *rproc)
>> {
>> struct da8xx_rproc *drproc = rproc->priv;
>> + struct device *dev = rproc->dev.parent;
>> + int ret;
>> +
>> + ret = reset_control_assert(drproc->dsp_reset);
>> + if (ret) {
>> + dev_err(dev, "reset_control_assert() failed: %d\n", ret);
>> + return ret;
>> + }
>>
>> - davinci_clk_reset_assert(drproc->dsp_clk);
>> clk_disable_unprepare(drproc->dsp_clk);
>>
>> return 0;
>> @@ -232,6 +245,7 @@ static int da8xx_rproc_probe(struct platform_device *pdev)
>> struct resource *bootreg_res;
>> struct resource *chipsig_res;
>> struct clk *dsp_clk;
>> + struct reset_control *dsp_reset;
>> void __iomem *chipsig;
>> void __iomem *bootreg;
>> int irq;
>> @@ -268,6 +282,15 @@ static int da8xx_rproc_probe(struct platform_device *pdev)
>> return PTR_ERR(dsp_clk);
>> }
>>
>> + dsp_reset = devm_reset_control_get_exclusive(dev, NULL);
>> + if (IS_ERR(dsp_reset)) {
>> + if (PTR_ERR(dsp_reset) != -EPROBE_DEFER)
>> + dev_err(dev, "unable to get reset control: %ld\n",
>> + PTR_ERR(dsp_reset));
>> +
>> + return PTR_ERR(dsp_reset);
>> + }
>> +
>> if (dev->of_node) {
>> ret = of_reserved_mem_device_init(dev);
>> if (ret) {
>> @@ -309,7 +332,7 @@ static int da8xx_rproc_probe(struct platform_device *pdev)
>> * *not* in reset, but da8xx_rproc_start() needs the DSP to be
>> * held in reset at the time it is called.
>> */
>> - ret = davinci_clk_reset_assert(drproc->dsp_clk);
>> + ret = reset_control_assert(dsp_reset);
>> if (ret)
>> goto free_rproc;
>>
>
> Tested your previous branch, need one more change in this patch to have
> the remoteproc boot be actually executing some code. The acquired
> dsp_reset is not stored in the drproc, so the start and stop were not
> effective. The issue was masked because reset_control_assert() and
> deassert() return 0 when a NULL pointer is passed in.
>
> --- a/drivers/remoteproc/da8xx_remoteproc.c
> +++ b/drivers/remoteproc/da8xx_remoteproc.c
> @@ -311,6 +311,7 @@ static int da8xx_rproc_probe(struct platform_device
> *pdev)
> drproc = rproc->priv;
> drproc->rproc = rproc;
> drproc->dsp_clk = dsp_clk;
> + drproc->dsp_reset = dsp_reset;
> rproc->has_iommu = false;
>
> regards
> Suman
>
Oh snap, thanks for spotting it.
I'll just resend last two patches, since the previous six will be
picked up at different places.
Thanks,
Bartosz
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
