From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx> This series converts the only user of the handcoded, mach-specific reset routines in the davinci platform to using the reset framework. Patches 1-3 add necessary lookups/DT-properties. Patches 4-6 fix issues found in the remoteproc davinci driver. Patch 7 converts the davinci-rproc driver to the reset framework. Patch 8 removes now dead code. Philipp: it turned out that it's indeed better to use the reset controller's device name for the entry lookup. Tested both in DT and legacy modes by booting the examples from ti-ipc-rtos recipe in meta-ti. This series applies on top of David Lechner's common-clk-v9 branch[1] with Philipp Zabel's reset/next branch[2] pulled in. It can be found in my github tree as well[3]. [1] git://github.com/dlech/ev3dev-kernel.git common-clk-v9 [2] git://git.pengutronix.de/git/pza/linux reset/next [3] git@xxxxxxxxxx:brgl/linux.git topic/davinci-reset v1 -> v2: - fixed the device tree patches the descriptions of which were mixed up - return -EPROBE_DEFER from davinci-rproc's probe() if we can't get the reset provider, since it's possible that the lookup table was not yet registered - made the local variable naming consistent in the davinci-rproc driver - fixed a typo in PATCH 5/8 v2 -> v3: - reworded the commit messages (s/remoteproc: da8xx/remoteproc\/davinci/) - call clk_disable_unprepare() if reset_control_deassert() fails in da8xx_rproc_start() - added a patch fixing the S_IRUGO checkpatch warning, since we're already modifying this driver anyway - added a temp variable for code brevity in da8xx_rproc_stop() - removed patch 1/8 (already applied to reset/next) Bartosz Golaszewski (8): ARM: davinci: dts: make psc0 a reset provider ARM: davinci: dts: add a reset control to the dsp node clk: davinci: add a reset lookup table for psc0 remoteproc/davinci: add the missing retval check for clk_enable() remoteproc/davinci: prepare and unprepare the clock where needed remoteproc/davinci: use octal permissions for module_param() remoteproc/davinci: use the reset framework clk: davinci: kill davinci_clk_reset_assert/deassert() arch/arm/boot/dts/da850.dtsi | 2 ++ arch/arm/mach-davinci/include/mach/clock.h | 21 -------------- drivers/clk/davinci/psc-da850.c | 7 +++++ drivers/clk/davinci/psc.c | 19 +------------ drivers/remoteproc/da8xx_remoteproc.c | 45 ++++++++++++++++++++++++------ 5 files changed, 47 insertions(+), 47 deletions(-) delete mode 100644 arch/arm/mach-davinci/include/mach/clock.h -- 2.16.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
