On 03/27/2018 12:24 AM, Sekhar Nori wrote: > Hi Suman, > > On Tuesday 27 March 2018 06:12 AM, Suman Anna wrote: >> I tried booting your tree [3] on the OMAPL138-LCDK board. I am using >> NFS, and I am unable to get to the console. I don't have any issues >> booting latest -next branch (next-20180326) which only has the reset and >> clock driver related changes. >> >> Here's the log towards the end of the boot.. >> --- >> pinctrl-single 1c14120.pinmux: 160 pins, size 80 >> Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled >> console [ttyS2] disabled >> 1d0d000.serial: ttyS2 at MMIO 0x1d0d000 (irq = 61, base_baud = 8250000) >> is a TI DA8xx/66AK2x >> console [ttyS2] enabled >> brd: module loaded >> libphy: Fixed MDIO Bus: probed >> davinci_mdio 1e24000.mdio: davinci mdio revision 1.5, bus freq 2200000 >> davinci_mdio 1e24000.mdio: no live phy, scanning all >> davinci_mdio: probe of 1e24000.mdio failed with error -5 >> i2c /dev entries driver >> <nothing after this> > > This is because of a bug in bootloader PLL configuration which got > uncovered only with CCF conversion. The bootloader that comes > pre-flashed with the board or the latest U-Boot master should work fine. > > Here is the log with latest U-Boot master: > https://pastebin.ubuntu.com/p/HkwY9g4YDc/ Thanks Sekhar, able to boot and test after using the latest u-boot. regards Suman -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
