Hi Suman, On Tuesday 27 March 2018 06:12 AM, Suman Anna wrote: > I tried booting your tree [3] on the OMAPL138-LCDK board. I am using > NFS, and I am unable to get to the console. I don't have any issues > booting latest -next branch (next-20180326) which only has the reset and > clock driver related changes. > > Here's the log towards the end of the boot.. > --- > pinctrl-single 1c14120.pinmux: 160 pins, size 80 > Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled > console [ttyS2] disabled > 1d0d000.serial: ttyS2 at MMIO 0x1d0d000 (irq = 61, base_baud = 8250000) > is a TI DA8xx/66AK2x > console [ttyS2] enabled > brd: module loaded > libphy: Fixed MDIO Bus: probed > davinci_mdio 1e24000.mdio: davinci mdio revision 1.5, bus freq 2200000 > davinci_mdio 1e24000.mdio: no live phy, scanning all > davinci_mdio: probe of 1e24000.mdio failed with error -5 > i2c /dev entries driver > <nothing after this> This is because of a bug in bootloader PLL configuration which got uncovered only with CCF conversion. The bootloader that comes pre-flashed with the board or the latest U-Boot master should work fine. Here is the log with latest U-Boot master: https://pastebin.ubuntu.com/p/HkwY9g4YDc/ Thanks, Sekhar -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
