This patch adds a device tree platform
driver description for Cadence UFS Controller.
Signed-off-by: Jan Kotas <jank@xxxxxxxxxxx>
---
.../devicetree/bindings/ufs/cdns-ufs-pltfrm.txt | 31 ++++++++++++++++++++
1 files changed, 31 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/ufs/cdns-ufs-pltfrm.txt
diff --git a/Documentation/devicetree/bindings/ufs/cdns-ufs-pltfrm.txt b/Documentation/devicetree/bindings/ufs/cdns-ufs-pltfrm.txt
new file mode 100644
index 0000000..d10229d
--- /dev/null
+++ b/Documentation/devicetree/bindings/ufs/cdns-ufs-pltfrm.txt
@@ -0,0 +1,31 @@
+* Cadence Universal Flash Storage (UFS) Controller
+
+UFS nodes are defined to describe on-chip UFS host controllers.
+Each UFS controller instance should have its own node.
+
+Required properties:
+- compatible : compatible list, contains the following controller:
+ "cdns,ufshc"
+ complemented with the JEDEC version:
+ "jedec,ufs-2.0"
+
+- reg : registers mapping
+- interrupts : interrupts mapping
+- clocks : List of phandle and clock specifier pairs.
+- clock-names : List of clock input name strings sorted in the same
+ order as the clocks property. "core_clk" is mandatory.
+- freq-table-hz : Array of <min max> operating frequencies stored in the same
+ order as the clocks property. If this property is not
+ defined or a value in the array is "0" then it is assumed
+ that the frequency is set by the parent clock or a
+ fixed rate clock source.
+
+Example:
+ ufs@fd030000 {
+ compatible = "cdns,ufshc", "jedec,ufs-2.0";
+ reg = <0xfd030000 0x10000>;
+ interrupts = <0 1 0>;
+ freq-table-hz = <0 0>;
+ clocks = <&ufs_core_clk 0>;
+ clock-names = "core_clk";
+ };
--
1.7.1
��.n��������+%������w��{.n����z�{��ܨ}���Ơz�j:+v�����w����ޙ��&�)ߡ�a����z�ޗ���ݢj��w�f
