> -----Original Message----- > From: Hans de Goede [mailto:hdegoede@xxxxxxxxxx] > Sent: 2018年3月20日 20:29 > To: Jun Li <jun.li@xxxxxxx>; gregkh@xxxxxxxxxxxxxxxxxxx; > robh+dt@xxxxxxxxxx; mark.rutland@xxxxxxx; > heikki.krogerus@xxxxxxxxxxxxxxx; linux@xxxxxxxxxxxx; rmfrfs@xxxxxxxxx; > yueyao.zhu@xxxxxxxxx > Cc: linux-usb@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; dl-linux-imx > <linux-imx@xxxxxxx> > Subject: Re: [PATCH 2/5] usb: typec: fusb302: remove max_snk_* for sink > config > > Hi, > > On 20-03-18 11:26, Li Jun wrote: > > Since max_snk_* is to be deprecated, so remove max_snk_* by adding a > > variable PDO for sink config. > > NACK there are actual users of the device-properties which you are now > breaking. As I mentioned in another thread, you need to instead add the pdo > array to the fusb302_chip struct (so that it is no longer > const) and generate a PDO_VAR pdo based on the device-properties. > OK, I did a search of those properties in dts dir of upstream kernel but didn't find any user of them, if there are actual of users, I will create a PDO_VAR pdo based on dt in v2. Thanks Jun Li > Regards, > > Hans > > > > > > Signed-off-by: Li Jun <jun.li@xxxxxxx> > > --- > > drivers/usb/typec/fusb302/fusb302.c | 13 +------------ > > 1 file changed, 1 insertion(+), 12 deletions(-) > > > > diff --git a/drivers/usb/typec/fusb302/fusb302.c > > b/drivers/usb/typec/fusb302/fusb302.c > > index da179aa..c183f46 100644 > > --- a/drivers/usb/typec/fusb302/fusb302.c > > +++ b/drivers/usb/typec/fusb302/fusb302.c > > @@ -1207,6 +1207,7 @@ static const u32 src_pdo[] = { > > > > static const u32 snk_pdo[] = { > > PDO_FIXED(5000, 400, PDO_FIXED_FLAGS), > > + PDO_VAR(800, 5000, 3000), > > }; > > > > static const struct tcpc_config fusb302_tcpc_config = { @@ -1214,9 > > +1215,6 @@ static const struct tcpc_config fusb302_tcpc_config = { > > .nr_src_pdo = ARRAY_SIZE(src_pdo), > > .snk_pdo = snk_pdo, > > .nr_snk_pdo = ARRAY_SIZE(snk_pdo), > > - .max_snk_mv = 5000, > > - .max_snk_ma = 3000, > > - .max_snk_mw = 15000, > > .operating_snk_mw = 2500, > > .type = TYPEC_PORT_DRP, > > .default_role = TYPEC_SINK, > > @@ -1784,15 +1782,6 @@ static int fusb302_probe(struct i2c_client > *client, > > chip->tcpc_dev.config = &chip->tcpc_config; > > mutex_init(&chip->lock); > > > > - if (!device_property_read_u32(dev, "fcs,max-sink-microvolt", &v)) > > - chip->tcpc_config.max_snk_mv = v / 1000; > > - > > - if (!device_property_read_u32(dev, "fcs,max-sink-microamp", &v)) > > - chip->tcpc_config.max_snk_ma = v / 1000; > > - > > - if (!device_property_read_u32(dev, "fcs,max-sink-microwatt", &v)) > > - chip->tcpc_config.max_snk_mw = v / 1000; > > - > > if (!device_property_read_u32(dev, "fcs,operating-sink-microwatt", &v)) > > chip->tcpc_config.operating_snk_mw = v / 1000; > > > > ��.n��������+%������w��{.n����z�{��ܨ}���Ơz�j:+v�����w����ޙ��&�)ߡ�a����z�ޗ���ݢj��w�f
