On Mon, Feb 17, 2014 at 05:22:47PM +0800, Shawn Guo wrote: > On Mon, Feb 17, 2014 at 09:52:21AM +0100, Philippe De Muyter wrote: > > On Sun, Feb 16, 2014 at 10:31:16PM +0800, Shawn Guo wrote: > > > On Sun, Feb 16, 2014 at 06:22:44PM +0400, Alexander Shiyan wrote: > > > > Воскресенье, 16 февраля 2014, 22:03 +08:00 от Shawn Guo <shawn.guo@xxxxxxxxxx>: > > > > > For imx50-weim and imx6q-weim type of devices, there might a WEIM CS > > > > > space configuration register in General Purpose Register controller, > > > > > e.g. IOMUXC_GPR1 on i.MX6Q. > > > > ... > > > > > +static int __init imx_weim_gpr_setup(struct platform_device *pdev) > > > > > +{ > > > > > + struct device_node *np = pdev->dev.of_node; > > > > > + struct property *prop; > > > > > + const __be32 *p; > > > > > + struct regmap *gpr; > > > > > + u32 gprvals[4] = { > > > > > + 05, /* CS0(128M) CS1(0M) CS2(0M) CS3(0M) */ > > > > > + 033, /* CS0(64M) CS1(64M) CS2(0M) CS3(0M) */ > > > > > + 0113, /* CS0(64M) CS1(32M) CS2(32M) CS3(0M) */ > > > > > + 01111, /* CS0(64M) CS1(32M) CS2(32M) CS3(0M) */ > > > > > + }; > > > > > + u32 gprval = 0; > > > > > + u32 val; > > > > > + int cs = 0; > > > > > + int i = 0; > > > > > + > > > > > + gpr = syscon_regmap_lookup_by_phandle(np, "fsl,weim-cs-gpr"); > > > > > + if (IS_ERR(gpr)) { > > > > > + dev_dbg(&pdev->dev, "failed to find weim-cs-gpr\n"); > > > > > + return 0; > > > > > > > > Only one comment: > > > > You do not use these error codes in the probe(), > > > > so let's declare this function as void. > > > > > > Oh, yes. I should check return of imx_weim_gpr_setup() in probe(). > > > Will add in the next version. > > > > Well, as all the error cases are already covered by error messages, there is > > no added value in testing that again in probe(). As Alexander wrote, you can > > declare imx_weim_gpr_setup() as 'void'. > > Hmm, shouldn't we stop probing when running into the error of invalid > ranges configuration? I agree, we could do that :) Philippe -- Philippe De Muyter +32 2 6101532 Macq SA rue de l'Aeronef 2 B-1140 Bruxelles -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html