For imx50-weim and imx6q-weim type of devices, there might a WEIM CS
space configuration register in General Purpose Register controller,
e.g. IOMUXC_GPR1 on i.MX6Q.
Depending on which configuration of the following 4 is chosen for given
system, IOMUXC_GPR1[11:0] should be set up as 05, 033, 0113 or 01111
correspondingly.
CS0(128M) CS1(0M) CS2(0M) CS3(0M)
CS0(64M) CS1(64M) CS2(0M) CS3(0M)
CS0(64M) CS1(32M) CS2(32M) CS3(0M)
CS0(32M) CS1(32M) CS2(32M) CS3(32M)
The patch creates a function for such type of devices, which scans
'ranges' property of WEIM node and build the GPR value incrementally.
Thus the WEIM CS GPR can be set up automatically at boot time.
Signed-off-by: Shawn Guo <shawn.guo@xxxxxxxxxx>
---
Changes since v3:
- Add DT property fsl,weim-cs-gpr back, so that the support can work
for more i.MX SoCs than just i.MX6Q.
Documentation/devicetree/bindings/bus/imx-weim.txt | 27 +++++++++-
drivers/bus/imx-weim.c | 55 ++++++++++++++++++++
2 files changed, 81 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/bus/imx-weim.txt b/Documentation/devicetree/bindings/bus/imx-weim.txt
index 0fd76c4..363c970 100644
--- a/Documentation/devicetree/bindings/bus/imx-weim.txt
+++ b/Documentation/devicetree/bindings/bus/imx-weim.txt
@@ -8,7 +8,12 @@ The actual devices are instantiated from the child nodes of a WEIM node.
Required properties:
- - compatible: Should be set to "fsl,<soc>-weim"
+ - compatible: Should contain one of the following:
+ "fsl,imx1-weim"
+ "fsl,imx27-weim"
+ "fsl,imx51-weim"
+ "fsl,imx50-weim"
+ "fsl,imx6q-weim"
- reg: A resource specifier for the register space
(see the example below)
- clocks: the clock, see the example below.
@@ -19,6 +24,26 @@ Required properties:
<cs-number> 0 <physical address of mapping> <size>
+Optional properties:
+
+ - fsl,weim-cs-gpr: For "fsl,imx50-weim" and "fsl,imx6q-weim" type of
+ devices, it should be the phandle to the system General
+ Purpose Register controller that contains WEIM CS GPR
+ register, e.g. IOMUXC_GPR1 on i.MX6Q. IOMUXC_GPR1[11:0]
+ should be set up as one of the following 4 possible
+ values depending on the CS space configuration.
+
+ IOMUXC_GPR1[11:0] CS0 CS1 CS2 CS3
+ ---------------------------------------------
+ 05 128M 0M 0M 0M
+ 033 64M 64M 0M 0M
+ 0113 64M 32M 32M 0M
+ 01111 32M 32M 32M 32M
+
+ In case that the property is absent, the reset value or
+ what bootloader sets up in IOMUXC_GPR1[11:0] will be
+ used.
+
Timing property for child nodes. It is mandatory, not optional.
- fsl,weim-cs-timing: The timing array, contains timing values for the
diff --git a/drivers/bus/imx-weim.c b/drivers/bus/imx-weim.c
index 3ef58c8..35e9529 100644
--- a/drivers/bus/imx-weim.c
+++ b/drivers/bus/imx-weim.c
@@ -11,6 +11,9 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/of_device.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
+#include <linux/regmap.h>
struct imx_weim_devtype {
unsigned int cs_count;
@@ -56,6 +59,55 @@ static const struct of_device_id weim_id_table[] = {
};
MODULE_DEVICE_TABLE(of, weim_id_table);
+static int __init imx_weim_gpr_setup(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct property *prop;
+ const __be32 *p;
+ struct regmap *gpr;
+ u32 gprvals[4] = {
+ 05, /* CS0(128M) CS1(0M) CS2(0M) CS3(0M) */
+ 033, /* CS0(64M) CS1(64M) CS2(0M) CS3(0M) */
+ 0113, /* CS0(64M) CS1(32M) CS2(32M) CS3(0M) */
+ 01111, /* CS0(64M) CS1(32M) CS2(32M) CS3(0M) */
+ };
+ u32 gprval = 0;
+ u32 val;
+ int cs = 0;
+ int i = 0;
+
+ gpr = syscon_regmap_lookup_by_phandle(np, "fsl,weim-cs-gpr");
+ if (IS_ERR(gpr)) {
+ dev_dbg(&pdev->dev, "failed to find weim-cs-gpr\n");
+ return 0;
+ }
+
+ of_property_for_each_u32(np, "ranges", prop, p, val) {
+ if (i % 4 == 0) {
+ cs = val;
+ } else if (i % 4 == 3 && val) {
+ val = (val / SZ_32M) | 1;
+ gprval |= val << cs * 3;
+ }
+ i++;
+ }
+
+ if (i == 0 || i % 4)
+ goto err;
+
+ for (i = 0; i < ARRAY_SIZE(gprvals); i++) {
+ if (gprval == gprvals[i]) {
+ /* Found it. Set up IOMUXC_GPR1[11:0] with it. */
+ regmap_update_bits(gpr, IOMUXC_GPR1, 0xfff, gprval);
+ return 0;
+ }
+ }
+
+err:
+ dev_err(&pdev->dev, "Invalid 'ranges' configuration\n");
+ return -EINVAL;
+}
+
/* Parse and set the timing for this device. */
static int __init weim_timing_setup(struct device_node *np, void __iomem *base,
const struct imx_weim_devtype *devtype)
@@ -92,6 +144,9 @@ static int __init weim_parse_dt(struct platform_device *pdev,
struct device_node *child;
int ret;
+ if (devtype == &imx50_weim_devtype)
+ imx_weim_gpr_setup(pdev);
+
for_each_child_of_node(pdev->dev.of_node, child) {
if (!child->name)
continue;
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
