On Fri, Mar 16, 2018 at 03:14:58PM +0530, Manu Gautam wrote: > Update compatible strings for USB2 PHYs on sdm845. > There are two QUSB2 PHYs present on sdm845. Few PHY registers > programming is different for these PHYs related to electrical > parameters, otherwise both are same. Register locations are different or tuning values are different? For the latter, is that something that could be DT properties? > > Signed-off-by: Manu Gautam <mgautam@xxxxxxxxxxxxxx> > --- > Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt | 4 +++- > 1 file changed, 3 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt > index 42c9742..20deaeb 100644 > --- a/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt > +++ b/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt > @@ -6,7 +6,9 @@ QUSB2 controller supports LS/FS/HS usb connectivity on Qualcomm chipsets. > Required properties: > - compatible: compatible list, contains > "qcom,msm8996-qusb2-phy" for 14nm PHY on msm8996, > - "qcom,qusb2-v2-phy" for QUSB2 V2 PHY. > + "qcom,qusb2-v2-phy" for QUSB2 V2 PHY, > + "qcom,sdm845-1-qusb2-phy" for primary PHY on sdm845, > + "qcom,sdm845-2-qusb2-phy" for secondary PHY on sdm845. > > - reg: offset and length of the PHY register set. > - #phy-cells: must be 0. > -- > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, > a Linux Foundation Collaborative Project > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
