Update compatible strings for USB2 PHYs on sdm845. There are two QUSB2 PHYs present on sdm845. Few PHY registers programming is different for these PHYs related to electrical parameters, otherwise both are same. Signed-off-by: Manu Gautam <mgautam@xxxxxxxxxxxxxx> --- Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt index 42c9742..20deaeb 100644 --- a/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt +++ b/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt @@ -6,7 +6,9 @@ QUSB2 controller supports LS/FS/HS usb connectivity on Qualcomm chipsets. Required properties: - compatible: compatible list, contains "qcom,msm8996-qusb2-phy" for 14nm PHY on msm8996, - "qcom,qusb2-v2-phy" for QUSB2 V2 PHY. + "qcom,qusb2-v2-phy" for QUSB2 V2 PHY, + "qcom,sdm845-1-qusb2-phy" for primary PHY on sdm845, + "qcom,sdm845-2-qusb2-phy" for secondary PHY on sdm845. - reg: offset and length of the PHY register set. - #phy-cells: must be 0. -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
