On the R40 SoC, the RX delay chain only has a range of 0~7 (hundred picoseconds), instead of 0~31. Also the TX delay chain is completely absent. This patch adds support for different ranges by adding per-compatible maximum values in the variant data. A maximum of 0 indicates that the delay chain is not supported or absent. Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx> --- drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 32 ++++++++++++++++------- 1 file changed, 23 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c index a51175bcfd11..08d263567a52 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c @@ -50,6 +50,12 @@ * @support_mii: Does the MAC handle MII * @support_rmii: Does the MAC handle RMII * @support_rgmii: Does the MAC handle RGMII + * + * @rx_delay_max: Maximum raw value for RX delay chain + * @tx_delay_max: Maximum raw value for TX delay chain + * These two also indicate the bitmask for + * the RX and TX delay chain registers. A + * value of zero indicates this is not supported. */ struct emac_variant { u32 default_syscon_value; @@ -59,6 +65,8 @@ struct emac_variant { bool support_mii; bool support_rmii; bool support_rgmii; + u8 rx_delay_max; + u8 tx_delay_max; }; /* struct sunxi_priv_data - hold all sunxi private data @@ -95,7 +103,9 @@ static const struct emac_variant emac_variant_h3 = { .soc_has_internal_phy = true, .support_mii = true, .support_rmii = true, - .support_rgmii = true + .support_rgmii = true, + .rx_delay_max = 31, + .tx_delay_max = 7, }; static const struct emac_variant emac_variant_v3s = { @@ -110,7 +120,9 @@ static const struct emac_variant emac_variant_a83t = { .syscon_field = &sun8i_syscon_reg_field, .soc_has_internal_phy = false, .support_mii = true, - .support_rgmii = true + .support_rgmii = true, + .rx_delay_max = 31, + .tx_delay_max = 7, }; static const struct emac_variant emac_variant_a64 = { @@ -119,7 +131,9 @@ static const struct emac_variant emac_variant_a64 = { .soc_has_internal_phy = false, .support_mii = true, .support_rmii = true, - .support_rgmii = true + .support_rgmii = true, + .rx_delay_max = 31, + .tx_delay_max = 7, }; #define EMAC_BASIC_CTL0 0x00 @@ -223,9 +237,7 @@ static const struct emac_variant emac_variant_a64 = { #define SYSCON_RMII_EN BIT(13) /* 1: enable RMII (overrides EPIT) */ /* Generic system control EMAC_CLK bits */ -#define SYSCON_ETXDC_MASK GENMASK(2, 0) #define SYSCON_ETXDC_SHIFT 10 -#define SYSCON_ERXDC_MASK GENMASK(4, 0) #define SYSCON_ERXDC_SHIFT 5 /* EMAC PHY Interface Type */ #define SYSCON_EPIT BIT(2) /* 1: RGMII, 0: MII */ @@ -851,8 +863,9 @@ static int sun8i_dwmac_set_syscon(struct stmmac_priv *priv) } val /= 100; dev_dbg(priv->device, "set tx-delay to %x\n", val); - if (val <= SYSCON_ETXDC_MASK) { - reg &= ~(SYSCON_ETXDC_MASK << SYSCON_ETXDC_SHIFT); + if (val <= gmac->variant->tx_delay_max) { + reg &= ~(gmac->variant->tx_delay_max << + SYSCON_ETXDC_SHIFT); reg |= (val << SYSCON_ETXDC_SHIFT); } else { dev_err(priv->device, "Invalid TX clock delay: %d\n", @@ -868,8 +881,9 @@ static int sun8i_dwmac_set_syscon(struct stmmac_priv *priv) } val /= 100; dev_dbg(priv->device, "set rx-delay to %x\n", val); - if (val <= SYSCON_ERXDC_MASK) { - reg &= ~(SYSCON_ERXDC_MASK << SYSCON_ERXDC_SHIFT); + if (val <= gmac->variant->rx_delay_max) { + reg &= ~(gmac->variant->rx_delay_max << + SYSCON_ERXDC_SHIFT); reg |= (val << SYSCON_ERXDC_SHIFT); } else { dev_err(priv->device, "Invalid RX clock delay: %d\n", -- 2.16.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html