Quoting srinivas.kandagatla@xxxxxxxxxx (2018-03-15 07:48:41)
> diff --git a/arch/arm/boot/dts/qcom-apq8064-db600c.dts b/arch/arm/boot/dts/qcom-apq8064-db600c.dts
> new file mode 100644
> index 000000000000..6a3250151038
> --- /dev/null
> +++ b/arch/arm/boot/dts/qcom-apq8064-db600c.dts
> @@ -0,0 +1,547 @@
> +// SPDX-License-Identifier: GPL-2.0
> +#include "qcom-apq8064-v2.0.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
> +#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
> +#include <dt-bindings/mfd/qcom-rpm.h>
> +
> +/ {
> + model = "Qualcomm Technologies, Inc. DB600c";
> + compatible = "arrow,apq8064-db600c", "qcom,apq8064";
> +
> + aliases {
> + serial0 = &gsbi7_serial;
> + serial1 = &gsbi1_serial;
> + i2c0 = &gsbi2_i2c;
> + i2c1 = &gsbi3_i2c;
> + i2c2 = &gsbi4_i2c;
> + i2c3 = &gsbi7_i2c;
> + spi0 = &gsbi5_spi;
> + };
Can you also add a chosen node for the stdout-path? Or maybe
that's contentious because there are two serial ports that could
possibly be used for serial console?
> +
> + regulators {
> + compatible = "simple-bus";
> + vph: regulator-fixed@1 {
Drop @1?
> + compatible = "regulator-fixed";
> + regulator-min-microvolt = <4500000>;
> + regulator-max-microvolt = <4500000>;
> + regulator-name = "VPH";
> + regulator-type = "voltage";
> + regulator-boot-on;
> + };
> +
> + /* on board fixed 3.3v supply */
> + vcc3v3: vcc3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "VCC3V3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + };
> +
> + hdmi-out {
> + compatible = "hdmi-connector";
> + type = "a";
> +
> + port {
> + hdmi_con: endpoint {
> + remote-endpoint = <&hdmi_out>;
> + };
> + };
> + };
Cool!
> +
> + soc {
> + pinctrl@800000 {
> + card_detect: card_detect {
> + mux {
> + pins = "gpio26";
> + function = "gpio";
> + bias-disable;
> + };
> + };
[...]
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1800000>;
> + bias-pull-down;
> + };
> +
> + l5 {
> + regulator-min-microvolt = <2750000>;
> + regulator-max-microvolt = <3000000>;
> + bias-pull-down;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + l6 {
> + regulator-min-microvolt = <2950000>;
> + regulator-max-microvolt = <2950000>;
> + bias-pull-down;
> + };
> +
> + l7 {
> + regulator-min-microvolt = <2950000>;
> + regulator-max-microvolt = <2950000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + /**
> + /**
Weird double comment here.
> + * 1.8v required on LS expansion
> + * for mezzanine boards
> + */
> + l15 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
