Re: [RFC PATCH] clk: qcom: rpmcc: Add support to XO buffered clocks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thanks for the review comments,

On 15/03/18 17:52, Stephen Boyd wrote:
Quoting srinivas.kandagatla@xxxxxxxxxx (2018-03-15 07:37:24)
diff --git a/drivers/clk/qcom/clk-rpm.c b/drivers/clk/qcom/clk-rpm.c
index c60f61b10c7f..261f5505e714 100644
--- a/drivers/clk/qcom/clk-rpm.c
+++ b/drivers/clk/qcom/clk-rpm.c
@@ -56,6 +57,19 @@
                 },                                                            \
         }
+#define DEFINE_CLK_RPM_XO_BUFFER(_platform, _name, _active, offset) \
+       static struct clk_rpm _platform##_##_name = {                         \
+               .rpm_clk_id = QCOM_RPM_CXO_BUFFERS,                           \
+               .xo_offset = (offset),                                        \
+               .rate = 19200000,                                             \

Shouldn't these rates also come from parent, i.e. pxo_board? So drop
this line?
Yep, will remove this.

+               .hw.init = &(struct clk_init_data){                           \
+                       .ops = &clk_rpm_fixed_ops,                            \
+                       .name = #_name,                                       \
+                       .parent_names = (const char *[]){ "pxo_board" },      \
+                       .num_parents = 1,                                     \
+               },                                                            \
+       }
+
  #define DEFINE_CLK_RPM_FIXED(_platform, _name, _active, r_id, r)             \
         static struct clk_rpm _platform##_##_name = {                         \
                 .rpm_clk_id = (r_id),                                         \
@@ -128,6 +142,8 @@
struct clk_rpm {
         const int rpm_clk_id;
+       const int xo_offset;
+       u32 xo_buffer_value;
         const bool active_only;
         unsigned long rate;
         bool enabled;
@@ -308,6 +330,11 @@ static void clk_rpm_fixed_unprepare(struct clk_hw *hw)
         u32 value = 0;
         int ret;
+ if (r->rpm_clk_id == QCOM_RPM_CXO_BUFFERS) {
+               r->xo_buffer_value &= ~(QCOM_RPM_XO_MODE_ON << r->xo_offset);
+               value = r->xo_buffer_value;
+       }
+

I seem to recall that the xo buffers are within the same "word" or
something like that for each of the buffers. So we would need to make
sure we don't overwrite the bits in there between clks that are
Code as it is will not work.
enabling/disabling stuff. Maybe make some sort of shared variable they
all point to and then put a mutex around it? May also be worth making
more clk_ops at that point to not conflate with the simpler on/off code.
Yep, I will give something like that a try in next version.


-srini


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux