André Przywara writes:
> On 12/03/18 16:10, Harald Geyer wrote:
> > Add the proper pin group node to reference in board files.
> >
> > Signed-off-by: Harald Geyer <harald@xxxxxxxxx>
>
> That looks correct to me, so:
>
> Reviewed-by: Andre Przywara <andre.przywara@xxxxxxx>
>
> But out of curiosity, what is this used for? In patch 5/5 I see it being
> used, but without a clue for what? Shouldn't enabling an I2C node be
> accompanied by some child node, presenting the device on the bus?
> I guess this I2C is not on some kind of "header" on that laptop?
I enabled it because the ANX6345 eDP-bridge is on that bus. There is
no linux (mainline) driver for this chip at the moment, the bootloader
initializes it. However I'm using the i2c-dev driver to read (and maybe)
change some register values from user space.
i2cdetect sees devices at 0x38, 0x39 and 0x3d - all of which might
be the ANX6345. I haven't looked into this in detail.
Since you are asking: Actually the teres has a "header" with usb-otg,
spi, i2c1 and some gpios, but it isn't exposed on the exterior of the
case and nothing is connected to it. So I didn't bother with adding
nodes for this in DT. Curious what olimex are planning to do with that.
Thanks for your review,
Harald
> Cheers,
> Andre.
>
> > ---
> > arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 5 +++++
> > 1 file changed, 5 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> > index 1b6dc31e7d91..64e452a758fa 100644
> > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> > @@ -309,6 +309,11 @@
> > interrupt-controller;
> > #interrupt-cells = <3>;
> >
> > + i2c0_pins: i2c0_pins {
> > + pins = "PH0", "PH1";
> > + function = "i2c0";
> > + };
> > +
> > i2c1_pins: i2c1_pins {
> > pins = "PH2", "PH3";
> > function = "i2c1";
> >
>
--
If you want to support my work:
see http://friends.ccbib.org/harald/supporting/
or donate via CLAM to xASPBtezLNqj4cUe8MT5nZjthRSEjrRQXN
or via peercoin to P98LRdhit3gZbHDBe7ta5jtXrMJUms4p7w
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
