This series adds support for the TERES I open hardware laptop produced by olimex. With these patches and a bootloader capable of setting up simple framebuffer the laptop is quite useable. Patches 1-4 add some pin descriptions and devices in the A64 dtsi, which are useful to have on the teres. Patch 5 finally adds the board dts itself. best regards, Harald Harald Geyer (5): arm64: dts: allwinner: a64: Add i2c0 pins arm64: dts: allwinner: a64: Add watchdog arm64: dts: allwinner: a64: add simplefb for A64 SoC arm64: dts: allwinner: a64: Add pwm device arm64: allwinner: a64: Add support for TERES I laptop arch/arm64/boot/dts/allwinner/Makefile | 1 + .../boot/dts/allwinner/sun50i-a64-teres-i.dts | 308 +++++++++++++++++++++ arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 44 +++ 3 files changed, 353 insertions(+) create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
