Hi Thierry, On 03/12/2018 09:04 AM, Thierry Reding wrote: > On Fri, Mar 02, 2018 at 04:32:20PM +0100, Philippe Cornu wrote: >> The Raydium Semiconductor Corporation RM68200 is a 5.5" 720x1280 >> TFT LCD panel connected using a MIPI-DSI video interface. >> >> Version 2: >> - Add Rob Herring Reviewed-by on dt-bindings. >> - Update Kconfig & driver thanks to Thierry Reding comments: no more >> DRV_NAME, DRM_WARN_ONCE instead of DRV_NAME where applicable, use >> backlight_enable/disable() & devm_of_find_backlight(), no extra >> gpio reset to 0, no more msg if successful, use RM68200 instead of >> rm68200 where necessary. >> >> Version 1: >> - Initial commit >> >> Philippe Cornu (2): >> dt-bindings/display/panel: Add support for Raydium rm68200 dsi panel >> drm/panel: Add support for Raydium RM68200 panel driver >> >> .../bindings/display/panel/raydium,rm68200.txt | 25 ++ >> drivers/gpu/drm/panel/Kconfig | 8 + >> drivers/gpu/drm/panel/Makefile | 1 + >> drivers/gpu/drm/panel/panel-raydium-rm68200.c | 437 +++++++++++++++++++++ >> 4 files changed, 471 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/display/panel/raydium,rm68200.txt >> create mode 100755 drivers/gpu/drm/panel/panel-raydium-rm68200.c > > Applied, thanks. There were a few tiny things I wasn't entirely happy > about, but I fixed those up myself. > > Most notable was the use of DRM_WARN_ONCE(), which is bad in this case > because it won't show any subsequent errors, ever again. I think in this > case the proper solution is DRM_ERROR_RATELIMITED(), or erroring out on > the first error, assuming that subsequent operations won't succeed > either. I went with the rate limitation. Big thank you for your nice cleanups and reworks, I will follow those in the future :-) I take the opportunity to thank you also for the merge of the 2 otm8009a patches. Moreover, if you think I need to update otm8009a driver with the same reworks (include order, DRM_ERROR_RATELIMITED, error msg, remove msg if successfull, struct data alignment...), please tell me :) Note: I plan to update it soon with new backlight_enable/disable api... Thank you again, Philippe :-) > > Thierry > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
