On Fri, Mar 02, 2018 at 04:32:20PM +0100, Philippe Cornu wrote: > The Raydium Semiconductor Corporation RM68200 is a 5.5" 720x1280 > TFT LCD panel connected using a MIPI-DSI video interface. > > Version 2: > - Add Rob Herring Reviewed-by on dt-bindings. > - Update Kconfig & driver thanks to Thierry Reding comments: no more > DRV_NAME, DRM_WARN_ONCE instead of DRV_NAME where applicable, use > backlight_enable/disable() & devm_of_find_backlight(), no extra > gpio reset to 0, no more msg if successful, use RM68200 instead of > rm68200 where necessary. > > Version 1: > - Initial commit > > Philippe Cornu (2): > dt-bindings/display/panel: Add support for Raydium rm68200 dsi panel > drm/panel: Add support for Raydium RM68200 panel driver > > .../bindings/display/panel/raydium,rm68200.txt | 25 ++ > drivers/gpu/drm/panel/Kconfig | 8 + > drivers/gpu/drm/panel/Makefile | 1 + > drivers/gpu/drm/panel/panel-raydium-rm68200.c | 437 +++++++++++++++++++++ > 4 files changed, 471 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/raydium,rm68200.txt > create mode 100755 drivers/gpu/drm/panel/panel-raydium-rm68200.c Applied, thanks. There were a few tiny things I wasn't entirely happy about, but I fixed those up myself. Most notable was the use of DRM_WARN_ONCE(), which is bad in this case because it won't show any subsequent errors, ever again. I think in this case the proper solution is DRM_ERROR_RATELIMITED(), or erroring out on the first error, assuming that subsequent operations won't succeed either. I went with the rate limitation. Thierry
Attachment:
signature.asc
Description: PGP signature
