On 15.02.2014 14:09, Arnd Bergmann wrote:
On Saturday 15 February 2014 12:27:33 Russell King - ARM Linux wrote:
On Sat, Feb 15, 2014 at 01:18:02PM +0100, Arnd Bergmann wrote:
If a wlan adapter has both SPI and SDIO front-ends, the external
dependencies (reset, clock, voltage, ...) will be the same, and
from the kernel perspective the main difference is that SPI cannot
be probed at all, while SDIO can be probed as long as the device
is powered on already.
Remember that MMC/SD/SDIO cards can be driven by either a MMC host
interface, or a SPI interface. Both are probe-able.
I knew about MMC/SD cards being required to understand simple SPI,
I wasn't sure about SDIO. My understanding however is that you
have to use the mmc_spi host driver to actually use MMC/SD devices
as a block device, and that requires having either a DT description
for the host or an spi_board_info, which I would not consider
discoverable.
For spi-mode SDIO devices I'm assuming it's similar, except that
you'd describe the actual SDIO device in the board info rather than
create a fake SDIO controller. Still not discoverable unless I'm
missing your point.
I'm not sure if we should assume that SPI = MMC over SPI. I believe
there might be a custom protocol involved as well.
Stepping aside from SPI, I already gave an example of a WLAN chip that
supports multiple control busses [1]. In addition to the commonly used
SDIO, it supports USB and HSIC as well:
[1] http://www.marvell.com/wireless/assets/marvell_avastar_88w8797.pdf
Moreover, some of Samsung boards use HSIC to communicate with modem
chips, which have exactly the same problem as we're trying to solve here
- they need to be powered on to be discovered.
So I really don't think we should be limiting this to MMC alone by any
means.
Now I don't really know why we want that badly to represent low level
control parts of such devices as children of control buses of their
enumerable parts. Could you tell me what benefits it has to justify the
added complexity of having to instantiate fake devices in respective
devices, even though they can be fully detected later?
Best regards,
Tomasz
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html