[PATCH v6 2/6] regulator: bindings: Add properties for coupled regulators

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Some regulators require keeping their voltage spread below defined
max_spread.

Add properties to provide information on regulators' coupling.

Signed-off-by: Maciej Purski <m.purski@xxxxxxxxxxx>
---
 Documentation/devicetree/bindings/regulator/regulator.txt | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt
index 2babe15b..a096fae 100644
--- a/Documentation/devicetree/bindings/regulator/regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/regulator.txt
@@ -68,6 +68,11 @@ Optional properties:
 	0: Disable active discharge.
 	1: Enable active discharge.
 	Absence of this property will leave configuration to default.
+- regulator-coupled-with: Regulators with which the regulator
+  is coupled. The linkage is 2-way - all coupled regulators should be linked
+  with each other. A regulator should not be coupled with its supplier.
+- regulator-coupled-max-spread: Max spread between voltages of coupled regulators
+  in microvolts.
 
 Deprecated properties:
 - regulator-compatible: If a regulator chip contains multiple
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux