Re: [PATCH v3 05/11] clk: tegra: prepare dfll driver for PWM regulator

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 06/02/18 16:34, Peter De Schrijver wrote:
> This patch prepares the dfll driver to work with PWM regulators.
> To do this we introduce a new array lut_uv which gives the voltage for
> a given index generated by the dfll logic. This index will then be
> translated to a PMIC voltage ID in case of I2C using the i2c_lut. In case
> of a PWM regulator, it will be used to determine the PWM duty cycle.
> We also introduce lut_bottom which holds the lowest voltage we will ever
> need. In case of I2C this can be set to zero because the i2c_lut will be
> initialized such that entry 0 will be the lowest voltage we will ever
> need. In case of PWM, the lowest voltage is determined by the regulator
> hardware so we need this software limit. Note that this is different
> from lut_min which gives the lowest voltage we allow taking temperature
> into account. In a future patchset we will update lut_vmin dynamically.
> Similarly lut_max will be the highest voltage allowed taking temperature
> into accouint. Also this will be updated dynamically once temperature
> dependence will be introduced.
> 
> Signed-off-by: Peter De Schrijver <pdeschrijver@xxxxxxxxxx>
> ---
>  drivers/clk/tegra/clk-dfll.c | 62 ++++++++++++++++++++++++++------------------
>  1 file changed, 37 insertions(+), 25 deletions(-)
> 
> diff --git a/drivers/clk/tegra/clk-dfll.c b/drivers/clk/tegra/clk-dfll.c
> index 0a7deee..fa97763 100644
> --- a/drivers/clk/tegra/clk-dfll.c
> +++ b/drivers/clk/tegra/clk-dfll.c
> @@ -301,9 +301,10 @@ struct tegra_dfll {
>  	u32				i2c_slave_addr;
>  
>  	/* i2c_lut array entries are regulator framework selectors */
> -	unsigned			i2c_lut[MAX_DFLL_VOLTAGES];
> -	int				i2c_lut_size;
> -	u8				lut_min, lut_max, lut_safe;
> +	unsigned int			i2c_lut[MAX_DFLL_VOLTAGES];
> +	unsigned int			lut_uv[MAX_DFLL_VOLTAGES];
> +	int				lut_size;
> +	u8				lut_bottom, lut_min, lut_max, lut_safe;
>  };
>  
>  #define clk_hw_to_dfll(_hw) container_of(_hw, struct tegra_dfll, dfll_clk_hw)
> @@ -531,10 +532,10 @@ static void dfll_load_i2c_lut(struct tegra_dfll *td)
>  	u32 val;
>  
>  	for (i = 0; i < MAX_DFLL_VOLTAGES; i++) {
> -		if (i < td->lut_min)
> -			lut_index = td->lut_min;
> -		else if (i > td->lut_max)
> -			lut_index = td->lut_max;
> +		if (i < td->lut_bottom)
> +			lut_index = td->lut_bottom;
> +		else if (i > td->lut_size - 1)
> +			lut_index = td->lut_size - 1;
>  		else
>  			lut_index = i;
>  
> @@ -594,9 +595,9 @@ static void dfll_init_out_if(struct tegra_dfll *td)
>  {
>  	u32 val;
>  
> -	td->lut_min = 0;
> -	td->lut_max = td->i2c_lut_size - 1;
> -	td->lut_safe = td->lut_min + 1;
> +	td->lut_min = td->lut_bottom;
> +	td->lut_max = td->lut_size - 1;
> +	td->lut_safe = td->lut_min + (td->lut_min < td->lut_max ? 1 : 0);
>  
>  	dfll_i2c_writel(td, 0, DFLL_OUTPUT_CFG);
>  	val = (td->lut_safe << DFLL_OUTPUT_CFG_SAFE_SHIFT) |
> @@ -619,11 +620,11 @@ static void dfll_init_out_if(struct tegra_dfll *td)
>   */
>  
>  /**
> - * find_lut_index_for_rate - determine I2C LUT index for given DFLL rate
> + * find_lut_index_for_rate - determine LUT index for given DFLL rate
>   * @td: DFLL instance
>   * @rate: clock rate
>   *
> - * Determines the index of a I2C LUT entry for a voltage that approximately
> + * Determines the index of a LUT entry for a voltage that approximately
>   * produces the given DFLL clock rate. This is used when forcing a value
>   * to the integrator during rate changes. Returns -ENOENT if a suitable
>   * LUT index is not found.
> @@ -637,11 +638,11 @@ static int find_lut_index_for_rate(struct tegra_dfll *td, unsigned long rate)
>  	if (IS_ERR(opp))
>  		return PTR_ERR(opp);
>  
> -	uv = dev_pm_opp_get_voltage(opp);
> +	uv = dev_pm_opp_get_voltage(opp) / td->soc->alignment.step_uv;
>  	dev_pm_opp_put(opp);
>  
> -	for (i = 0; i < td->i2c_lut_size; i++) {
> -		if (regulator_list_voltage(td->vdd_reg, td->i2c_lut[i]) == uv)
> +	for (i = td->lut_bottom; i < td->lut_size; i++) {
> +		if ((td->lut_uv[i] / td->soc->alignment.step_uv) >= uv)
>  			return i;
>  	}
>  
> @@ -1377,15 +1378,17 @@ static int dfll_init(struct tegra_dfll *td)
>   */
>  static int find_vdd_map_entry_exact(struct tegra_dfll *td, int uV)
>  {
> -	int i, n_voltages, reg_uV;
> +	int i, n_voltages, reg_mult, align_mult;
>  
> +	align_mult = uV / td->soc->alignment.step_uv;
>  	n_voltages = regulator_count_voltages(td->vdd_reg);
>  	for (i = 0; i < n_voltages; i++) {
> -		reg_uV = regulator_list_voltage(td->vdd_reg, i);
> -		if (reg_uV < 0)
> +		reg_mult = regulator_list_voltage(td->vdd_reg, i) /
> +				td->soc->alignment.step_uv;
> +		if (reg_mult < 0)
>  			break;
>  
> -		if (uV == reg_uV)
> +		if (align_mult == reg_mult)
>  			return i;
>  	}
>  
> @@ -1399,15 +1402,17 @@ static int find_vdd_map_entry_exact(struct tegra_dfll *td, int uV)
>   * */
>  static int find_vdd_map_entry_min(struct tegra_dfll *td, int uV)
>  {
> -	int i, n_voltages, reg_uV;
> +	int i, n_voltages, reg_mult, align_mult;
>  
> +	align_mult = uV / td->soc->alignment.step_uv;
>  	n_voltages = regulator_count_voltages(td->vdd_reg);
>  	for (i = 0; i < n_voltages; i++) {
> -		reg_uV = regulator_list_voltage(td->vdd_reg, i);
> -		if (reg_uV < 0)
> +		reg_mult = regulator_list_voltage(td->vdd_reg, i) /
> +				td->soc->alignment.step_uv;
> +		if (reg_mult < 0)
>  			break;
>  
> -		if (uV <= reg_uV)
> +		if (align_mult <= reg_mult)
>  			return i;
>  	}
>  
> @@ -1450,8 +1455,10 @@ static int dfll_build_i2c_lut(struct tegra_dfll *td)
>  	if (lut < 0)
>  		goto out;
>  	td->i2c_lut[0] = lut;
> +	td->lut_bottom = 0;
>  
>  	for (j = 1, rate = 0; ; rate++) {
> +
>  		opp = dev_pm_opp_find_freq_ceil(td->soc->dev, &rate);
>  		if (IS_ERR(opp))
>  			break;
> @@ -1484,13 +1491,18 @@ static int dfll_build_i2c_lut(struct tegra_dfll *td)
>  		if (v >= v_max)
>  			break;
>  	}
> -	td->i2c_lut_size = j;
> +	td->lut_size = j;
>  
>  	if (!td->dvco_rate_min)
>  		dev_err(td->dev, "no opp above DFLL minimum voltage %d mV\n",
>  			td->soc->cvb->min_millivolts);
> -	else
> +	else {
>  		ret = 0;
> +		for (j = 0; j < td->lut_size; j++)
> +			td->lut_uv[j] =
> +				regulator_list_voltage(td->vdd_reg,
> +						       td->i2c_lut[j]);
> +	}
>  
>  out:
>  	return ret;
> 

I am a bit confused by this patch as I don't fully understand from the
description what is being changed. For example, there are a few places
where you are dividing by td->soc->alignment.step_uv, which seems to be
changing the calculations/behaviour for I2C unless I am missing something?

I would also consider renaming lut_bottom and lut_min as something like
lut_abs_min and lut_cur_min, to indicate that one is the absolute min
and the other is the current min depending on operating conditions.

Cheers
Jon

-- 
nvpublic
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux