On 23/02/18 13:37, Mylène Josserand wrote:
> On Cortex-A7, the CNTVOFF register from arch timer is uninitialized.
Only on A7? Is that specific to your platform?
> It should be done by the bootloader but it is currently not the case,
> even for boot CPU because this SoC is booting in secure mode.
> It leads to an random offset value meaning that each CPU will have a
> different time, which isn't working very well.
>
> Add assembly code used for boot CPU and secondary CPU cores to make
> sure that the CNTVOFF register is initialized.
>
> Signed-off-by: Mylène Josserand <mylene.josserand@xxxxxxxxxxx>
> ---
> arch/arm/mach-sunxi/headsmp.S | 21 +++++++++++++++++++++
> arch/arm/mach-sunxi/sunxi.c | 4 ++++
> 2 files changed, 25 insertions(+)
>
> diff --git a/arch/arm/mach-sunxi/headsmp.S b/arch/arm/mach-sunxi/headsmp.S
> index d5c97e945e69..605896251927 100644
> --- a/arch/arm/mach-sunxi/headsmp.S
> +++ b/arch/arm/mach-sunxi/headsmp.S
> @@ -65,9 +65,30 @@ ENTRY(sunxi_mc_smp_cluster_cache_enable)
> first: .word sunxi_mc_smp_first_comer - .
> ENDPROC(sunxi_mc_smp_cluster_cache_enable)
>
> +ENTRY(sunxi_init_cntvoff)
> + /*
> + * CNTVOFF has to be initialized either from non-secure Hypervisor
> + * mode or secure Monitor mode with SCR.NS==1. If TrustZone is enabled
> + * then it should be handled by the secure code
> + */
> + cps #MON_MODE
> + mrc p15, 0, r1, c1, c1, 0 /* Get Secure Config */
> + orr r0, r1, #1
> + mcr p15, 0, r0, c1, c1, 0 /* Set Non Secure bit */
> + instr_sync
Since these CPUs are all ARMv7, you can use isb directly. Nobody wants
to see more of the CP15 barriers.
> + mov r0, #0
> + mcrr p15, 4, r0, r0, c14 /* CNTVOFF = 0 */
> + instr_sync
> + mcr p15, 0, r1, c1, c1, 0 /* Set Secure bit */
> + instr_sync
> + cps #SVC_MODE
> + ret lr
Given that this code is identical to the shmobile hack, it'd be good to
make it common, one way or another.
> +ENDPROC(sunxi_init_cntvoff)
> +
> #ifdef CONFIG_SMP
> ENTRY(sunxi_boot)
> bl sunxi_mc_smp_cluster_cache_enable
> + bl sunxi_init_cntvoff
> b secondary_startup
> ENDPROC(sunxi_boot)
>
> diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c
> index 5e9602ce1573..4bb041492b54 100644
> --- a/arch/arm/mach-sunxi/sunxi.c
> +++ b/arch/arm/mach-sunxi/sunxi.c
> @@ -37,8 +37,12 @@ static const char * const sun6i_board_dt_compat[] = {
> };
>
> extern void __init sun6i_reset_init(void);
> +extern void sunxi_init_cntvoff(void);
> +
> static void __init sun6i_timer_init(void)
> {
> + sunxi_init_cntvoff();
> +
It is slightly odd that some CPUs get initialized from the early asm
code, and some others do a detour via some C code. I'm sure this could
be made to work
> of_clk_init(NULL);
> if (IS_ENABLED(CONFIG_RESET_CONTROLLER))
> sun6i_reset_init();
>
Thanks,
M.
--
Jazz is not dead. It just smells funny...
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
