This series removes a gross DT property and adds a DT binding for the VCHI driver so that we can start probing it automatically on RPi. This is useful immediately as it lets you use vcgencmd for measuring clocks (we have code for this in Linux but no userland interface). It'll also be useful as a base for getting the consumer drivers to probe automatically, which I'm expecting we'll do using a bus provided by VCHI, since we'll be able to do some service discovery on VCHI. VCHI itself can't just use a bus from the firmware driver, because of the regs and interrupts -- the firmware link it has is just to allow a request to the VPU to bring up VCHI on this hardware doorbell. Greg: I'm good with merging patch 1 whenever, but I'd like to make sure Stefan has a chance to take a look at the cache-line-size property change, at least. Eric Anholt (5): staging: vc04_services: Remove dead FRAGMENTS_T staging: vc04_services: Remove cache-line-size property. dt-bindings: soc: Add a binding for the Broadcom VCHI services. ARM: dts: bcm2835: Add VCHI node to the Raspberry Pi boards. staging: vc04_services: Mark the "DT bindings" job done. .../bindings/soc/bcm/brcm,bcm2835-vchiq.txt | 18 ++++++++++++++++ arch/arm/boot/dts/bcm2835-rpi.dtsi | 7 ++++++ drivers/staging/vc04_services/interface/vchi/TODO | 9 ++------ .../interface/vchiq_arm/vchiq_2835_arm.c | 25 +++++++--------------- .../interface/vchiq_arm/vchiq_pagelist.h | 6 ------ 5 files changed, 35 insertions(+), 30 deletions(-) create mode 100644 Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.txt -- 2.16.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
