Add a device-tree binding for Texas Instrument's PCM1789 codec.
For the moment, only I2C bus is supported but SPI could be added
in future.
Signed-off-by: Mylène Josserand <mylene.josserand@xxxxxxxxxxx>
---
Documentation/devicetree/bindings/sound/pcm1789.txt | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/pcm1789.txt
diff --git a/Documentation/devicetree/bindings/sound/pcm1789.txt b/Documentation/devicetree/bindings/sound/pcm1789.txt
new file mode 100644
index 000000000000..a6cdc2c83c98
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/pcm1789.txt
@@ -0,0 +1,21 @@
+Texas Instruments pcm1789 DT bindings
+
+This driver supports the I2C bus.
+
+Required properties:
+
+ - compatible: "ti,pcm1789"
+
+Required properties on I2C:
+
+ - reg: the I2C address
+ - reset-gpios: GPIO to control the RESET pin
+
+Examples:
+
+ codec: pcm1789@4c {
+ compatible = "ti,pcm1789";
+ reg = <0x4c>;
+ reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+ #sound-dai-cells = <0>;
+ };
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
