Hi, This patchset is adding all current existing Xilinx ZynqMP boards. zcu* boards are customer boards. zc1* are mainly Xilinx internal boards but some of them have been shared with customers. zc1751 is unique in this set because it is based board with FMC card for silicon/hard IP validation. All boards are using the same default clock configuration till clock driver is merged to mainline. Some boards also contain other components which are not described because mainline driver haven't been merged yet. For example nand, qspi, pinctrl and phy. Please let me know if you see any issue with these boards. Thanks, Michal Changes in v3: - Remove usb and gpio aliases - Use i2c-mux instead of i2cswitch on revB board - Remove qspi comment from revB - Remove gpio and usb aliases - Use i2c-mux instead of i2cswitch - was done with zcu106 - Remove gpio and usb aliases - remove gpio and usb aliases - Remove usb and gpio aliases - Remove aliases for can, usb, gpio - dc2 fix spi_flashes and partitions Changes in v2: - New patch in this series - Use i2c-mux instead of i2cswitch - Remove i2c mw u-boot commands - Use 96boards labels for i2cs and spis - Fix pmic and wifi node - Record compatible string to xilinx.txt - Remove Nathalie's email (she left Xilinx already) - Remove i2c mw u-boot commands - Use i2c-mux instead of i2cswitch - Use clock generator without numbers. - Use dash in node name zcu102 rev1.0 - Record compatible string to xilinx.txt - Remove i2c mw u-boot commands - Record compatible string to xilinx.txt - Remove i2c mw u-boot commands - Use i2c-mux instead of i2cswitch - Use clock generator without numbers - Record compatible string to xilinx.txt - Remove i2c mw u-boot commands - Use i2c-mux instead of i2cswitch - Use clock generator without numbers. - Record compatible string to xilinx.txt - Record compatible string to xilinx.txt - Record compatible string to xilinx.txt Michal Simek (8): dt-bindings: xilinx: Add description for ZynqMP arm64: zynqmp: Add support for Xilinx zcu100-revC arm64: zynqmp: Add support for Xilinx zcu102 arm64: zynqmp: Add support for Xilinx zcu104-revA arm64: zynqmp: Add support for Xilinx zcu106-revA arm64: zynqmp: Add support for Xilinx zcu111-revA arm64: zynqmp: Add support for Xilinx zc12XX boards arm64: zynqmp: Add support for Xilinx zc1751 Documentation/devicetree/bindings/arm/xilinx.txt | 42 ++ arch/arm64/boot/dts/xilinx/Makefile | 15 + arch/arm64/boot/dts/xilinx/zynqmp-clk.dtsi | 213 ++++++++ arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts | 54 ++ arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts | 42 ++ arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts | 42 ++ .../boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts | 131 +++++ .../boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts | 168 +++++++ .../boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts | 150 ++++++ .../boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts | 178 +++++++ .../boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts | 125 +++++ arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts | 289 +++++++++++ .../arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts | 36 ++ arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts | 548 +++++++++++++++++++++ arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts | 40 ++ arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts | 195 ++++++++ arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts | 522 ++++++++++++++++++++ arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts | 444 +++++++++++++++++ 18 files changed, 3234 insertions(+) create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-clk.dtsi create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
