[PATCH] ARM64: dts: meson: reduce odroid-c2 eMMC maximum rate

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Different modules maybe installed by the user on the eMMC connector
of the odroid-c2. While the red modules are working without an issue,
it seems some black modules (apparently Samsung based) are having
issue at 200MHz

While the tuning algorithm introduced in v4.14 enables high speed modes
on every other tested designs, it seems a problem remains for this
particular combination of board and eMMC module.

Lowering the maximum frequency of the eMMC on this board until we can
figure out a better solution.

Fixes: d341ca88eead ("mmc: meson-gx: rework tuning function")
Suggested-by: Ellie Reeves <ellierevves@xxxxxxxxx>
Signed-off-by: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
---
 arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index 73a030a5ecf3..43475139576c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -311,7 +311,7 @@
 	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <8>;
-	max-frequency = <200000000>;
+	max-frequency = <100000000>;
 	non-removable;
 	disable-wp;
 	cap-mmc-highspeed;
-- 
2.14.3

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux