On 27 February 2018 at 15:59, Andy Shevchenko <andy.shevchenko@xxxxxxxxx> wrote: > On Tue, Feb 27, 2018 at 1:01 PM, Ard Biesheuvel > <ard.biesheuvel@xxxxxxxxxx> wrote: >> Add a binding and a driver for the I2C IP found in the Socionext SynQuacer >> SoC, which is essentially a rebranded version of the Fujitsu F_I2C controller. >> > > Thanks for an update! > FWIW, > Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx> > Thanks Andy >> v3: >> - incorporate more of Andy's review comments (#2), especially regarding the >> bus speed and clock source handling for ACPI >> - patch #1 unchanged. >> >> v2: >> - incorporate Andy's review comments (#2) >> - patch #1 unchanged. >> >> Ard Biesheuvel (2): >> dt-bindings: i2c: add binding for Socionext SynQuacer I2C >> i2c: add support for Socionext SynQuacer I2C controller >> >> Documentation/devicetree/bindings/i2c/i2c-synquacer.txt | 29 + >> drivers/i2c/busses/Kconfig | 10 + >> drivers/i2c/busses/Makefile | 1 + >> drivers/i2c/busses/i2c-synquacer.c | 787 ++++++++++++++++++++ >> 4 files changed, 827 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/i2c/i2c-synquacer.txt >> create mode 100644 drivers/i2c/busses/i2c-synquacer.c >> >> -- >> 2.11.0 >> > > > > -- > With Best Regards, > Andy Shevchenko -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
