On Tue, Feb 27, 2018 at 1:01 PM, Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx> wrote: > Add a binding and a driver for the I2C IP found in the Socionext SynQuacer > SoC, which is essentially a rebranded version of the Fujitsu F_I2C controller. > Thanks for an update! FWIW, Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx> P.S. clk_prepare_enable() may fail in ->probe() as well. > v3: > - incorporate more of Andy's review comments (#2), especially regarding the > bus speed and clock source handling for ACPI > - patch #1 unchanged. > > v2: > - incorporate Andy's review comments (#2) > - patch #1 unchanged. > > Ard Biesheuvel (2): > dt-bindings: i2c: add binding for Socionext SynQuacer I2C > i2c: add support for Socionext SynQuacer I2C controller > > Documentation/devicetree/bindings/i2c/i2c-synquacer.txt | 29 + > drivers/i2c/busses/Kconfig | 10 + > drivers/i2c/busses/Makefile | 1 + > drivers/i2c/busses/i2c-synquacer.c | 787 ++++++++++++++++++++ > 4 files changed, 827 insertions(+) > create mode 100644 Documentation/devicetree/bindings/i2c/i2c-synquacer.txt > create mode 100644 drivers/i2c/busses/i2c-synquacer.c > > -- > 2.11.0 > -- With Best Regards, Andy Shevchenko -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
