Re: [PATCH v2 4/7] dt-bindings: i2c: Add device tree bindings for GENI I2C Controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 1/16/2018 11:31 PM, Bjorn Andersson wrote:
On Fri 12 Jan 17:05 PST 2018, Karthikeyan Ramasubramanian wrote:

Add device tree binding support for I2C Controller in GENI based
QUP Wrapper.

Signed-off-by: Sagar Dharia <sdharia@xxxxxxxxxxxxxx>
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@xxxxxxxxxxxxxx>
---
  .../devicetree/bindings/i2c/i2c-qcom-geni.txt      | 35 ++++++++++++++++++++++
  .../devicetree/bindings/soc/qcom/qcom,geni-se.txt  | 19 ++++++++++++
  2 files changed, 54 insertions(+)
  create mode 100644 Documentation/devicetree/bindings/i2c/i2c-qcom-geni.txt

diff --git a/Documentation/devicetree/bindings/i2c/i2c-qcom-geni.txt b/Documentation/devicetree/bindings/i2c/i2c-qcom-geni.txt
new file mode 100644
index 0000000..ea84be7
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-qcom-geni.txt
@@ -0,0 +1,35 @@
+Qualcomm Technologies Inc. GENI Serial Engine based I2C Controller
+
+Required properties:
+ - compatible: Should be:
+   * "qcom,i2c-geni.

As this is a subset of geni it would look better with qcom,geni-i2c
imho.
Ok.

+ - reg: Should contain QUP register address and length.
+ - interrupts: Should contain I2C interrupt.
+ - clock-names: Should contain "se-clk".

Omit "clk" from the clock names.
Ok.

+ - clocks: Serial engine core clock needed by the device.
+ - pinctrl-names/pinctrl-0/1: The GPIOs assigned to this core. The names
+   should be "active" and "sleep" for the pin confuguration when core is active
+   or when entering sleep state.

No need to describe pinctrl properties - and your description here
doesn't match the code.
Removed as it is called by the device core before probe.

+ - #address-cells: Should be <1> Address cells for i2c device address
+ - #size-cells: Should be <0> as i2c addresses have no size component
+
+Optional property:
+ - clock-frequency : Desired I2C bus clock frequency in Hz.
+   When missing default to 400000Hz.
+
+Child nodes should conform to i2c bus binding.

..."as described in i2c.txt"
Ok.

Regards,
Bjorn

Regards,
Karthik.
--
Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux