Hello, in this second iteration I have fixed two remarks from Geert received on v1: - Extend "du" address length to include third channel - Move usb2_phy1 device node next to usb2_phy0 Two minor nits were not addressed: - "placeholder" comment position not changed to maintain consistency with placeholders in M3-W. When they'll get changed, let's change all of them at the same time. - The addresses block sizes (and multiple address range blocks) are still there (next time we can consider dropping the unit address from place-holder nodes and do not add any "reg" property at all, until DTC won't start complaining about this as well) All patches but the newly introduced 7/7 now have Geert's Reviewed-by tag. Simon: as per v1, this series is based on my M3-N enablement series, last patch on Ether-AVB excluded. Thanks j v1 -> v2: - Extend "du" address length to include third channel - Move usb2_phy1 node next to usb2_phy0 Jacopo Mondi (7): arm64: dts: renesas: r8a77965: Add "reg" properties arm64: dts: renesas: r8a77965: Add #address-cells and #size-cells arm64: dts: renesas: r8a77965: Remove stale reg property arm64: dts: renesas: r8a77965: Add #phy-cells property arm64: dts: renesas: r8a77965: Add #pwm-cells property arm64: dts: renesas: r8a77965: Add #interrupt-cells property arm64: dts: renesas: r8a77965: Move usb2_phy1 up arch/arm64/boot/dts/renesas/r8a77965.dtsi | 89 +++++++++++++++++++++++++++++-- 1 file changed, 84 insertions(+), 5 deletions(-) -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
