- Add missing pinctrl description. Support is made optional as dfsdm may use internal sources (e.g. via registers) - Fix typo in IIO STM32 DFSDM filter "MANCH_F" description. Basically, this should be "falling edge = logic 0", not "1" that applies to "MANCH_R". BTW, make the description complete by describing both rising/falling edges as described in reference manuals. Fixes: 6c82f947fc97 ("IIO: add DT bindings for stm32 DFSDM filter") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@xxxxxx> --- Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt index 911492da..ed7520d 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt @@ -32,6 +32,10 @@ Optional properties: to "clock" property. Frequency must be a multiple of the rcc clock frequency. If not, SPI CLKOUT frequency will not be accurate. +- pinctrl-names: Set to "default". +- pinctrl-0: List of phandles pointing to pin configuration + nodes to set pins in mode of operation for dfsdm + on external pin. Contents of a STM32 DFSDM child nodes: -------------------------------------- @@ -68,8 +72,8 @@ Optional properties: - st,adc-channel-types: Single-ended channel input type. - "SPI_R": SPI with data on rising edge (default) - "SPI_F": SPI with data on falling edge - - "MANCH_R": manchester codec, rising edge = logic 0 - - "MANCH_F": manchester codec, falling edge = logic 1 + - "MANCH_R": manchester codec, rising edge = logic 0, falling edge = logic 1 + - "MANCH_F": manchester codec, rising edge = logic 1, falling edge = logic 0 - st,adc-channel-clk-src: Conversion clock source. - "CLKIN": external SPI clock (CLKIN x) - "CLKOUT": internal SPI clock (CLKOUT) (default) -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html