Re: [PATCH v1 3/3] drivers: mtd: chips: add support for the dual die stacked PNOR

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 21 Feb 2018 19:32:37 +0000
Bean Huo <beanhuo@xxxxxxxxxxx> wrote:

> From: beanhuo <beanhuo@xxxxxxxxxx>
> 
> For the dual die stacked parallel NOR flash (PNOR), it comprises
> two dies in the stack. These two dies can receive the commands in
> parallel, but there is only one die can be selected or accept
> commands according to the maximum address line A[max].
> For example,Micron parallel NOR MT28FW02GBBA1HPC and Cypress
> S70GL02GS, both are dual-die stacked PNOR with 2Gbit density,
> and maximum address line A[26], when A[26] == 0, the lower 1Gb die
> is selected, when A[26] == 1, the upper 1Gb is selected.
> 
> This patch is to check the accessing offset in the chip and rebase
> the unlock cycle command base addresses.
> 
> Signed-off-by: beanhuo <beanhuo@xxxxxxxxxx>
> ---
>  drivers/mtd/chips/cfi_cmdset_0002.c | 144 ++++++++++++++++++++++++++++--------
>  1 file changed, 113 insertions(+), 31 deletions(-)
> 
> diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
> index 56aa6b7..8fa2193 100644
> --- a/drivers/mtd/chips/cfi_cmdset_0002.c
> +++ b/drivers/mtd/chips/cfi_cmdset_0002.c
> @@ -1104,6 +1104,27 @@ do {  \
>  
>  #endif
>  
> +/*
> + * The dual die stacked device comprises two identical dies which connected

								    ^are

> + * in parallel.But there is only one die being selected each time according

		  ^ missing space after the period

> + * to maximum address line A[max]. When A[max] == 0, the lower die is selected,
> + * when A[max] == 1, the upper die is selected. This function will reture the

								      ^return

> + * CFI unlock-command base address accrording to accessing address.

Is it really just about unlock commands?

> + */
> +static loff_t get_cmd_base_address(struct map_info *map, struct flchip *chip,
> +		loff_t offset)
> +{
> +	struct cfi_private *cfi = map->fldrv_priv;
> +	unsigned long cmd_base_addr = chip->start;
> +
> +	if (cfi->device_stack == CFI_DEVICESTACK_2DIE) {
> +		if (offset >= (1 << (cfi->cfiq->DevSize - 1)))
> +			cmd_base_addr += (1 << (cfi->cfiq->DevSize - 1));
> +	}

Could be done in a more generic way:

	unsigned long die = offset >> (cfi->cfiq->DevSize - 1);

	if (cfi->device_stack == 1) {
		WARN_ON(die);
		return cmd_base_addr;
	}

	cmd_base_addr += die << (cfi->cfiq->DevSize - 1);

> +
> +	return cmd_base_addr;
> +}
> +
>  static inline int do_read_onechip(struct map_info *map, struct flchip *chip, loff_t adr, size_t len, u_char *buf)
>  {
>  	unsigned long cmd_addr;
> @@ -1180,12 +1201,18 @@ static inline void otp_enter(struct map_info *map, struct flchip *chip,
>  			     loff_t adr, size_t len)
>  {
>  	struct cfi_private *cfi = map->fldrv_priv;
> +	unsigned long  cmd_base_addr;
>  
> -	cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi,
> +	/* For the dual die device, rebase the command base address according

Please do not use net-style comments.

-- 
Boris Brezillon, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux