On Wed, Feb 14, 2018 at 3:22 AM, Andy Shevchenko
<andy.shevchenko@xxxxxxxxx> wrote:
> On Mon, Feb 12, 2018 at 6:48 AM, Joel Stanley <joel@xxxxxxxxx> wrote:
>> The Nuvoton UART is almost compatible with the 8250 driver when probed
>> via the 8250_of driver, however it requires some extra configuration
>> at startup.
>
>
>> + [PORT_NPCM] = {
>> + .name = "Nuvoton 16550",
>> + .fifo_size = 16,
>> + .tx_loadsz = 16,
>> + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10 |
>> + UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT,
>> + .rxtrig_bytes = {1, 4, 8, 14},
>> + .flags = UART_CAP_FIFO,
>
>> +
>
> Redundant.
You are referring to the extra whitespace?
>> + },
>
>> + /*
>> + * Nuvoton calls the scratch register 'UART_TOR' (timeout
>> + * register). Enable it, and set TIOC (timeout interrupt
>> + * comparator) to be 0x20 for correct operation.
>> + */
>> + serial_port_out(port, UART_NPCM_TOR, UART_NPCM_TOIE | 0x20);
>
>> +/* Nuvoton NPCM UARTs have a custom divisor calculation */
>> + return DIV_ROUND_CLOSEST(port->uartclk, 16 * baud + 2) - 2;
>
> Is there any link to datasheet?
I have a copy of the datasheet under NDA. The Nuvoton guys might be
able to help you out. Avi?
>
>> +/* Nuvoton UART */
>> +#define PORT_NPCM 118
>
> We have gaps there. #40 is perfect place for this one.
Ok, I will move it up. Thanks for the review.
Cheers,
Joel
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
